EN-Labs
EN-Labs ATX20P224P6 20-pin to 24-pin power adapter 6 inch 18AWG
Converts a 20-pin ATX PSU for 24-pin motherboards using 18AWG tinned copper wire
- TypePower
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType: ATX PSU 20pin to EPS 24pin motherboard power adapter c
- Connector Number2
- Terminal GenderMale to Female
- Use your existing 20-pin PSU with a 24-pin motherboard
- 6-inch cable keeps internal wiring short and tidy
- 18AWG tinned copper conductors carry 3.3, 5 and 12V DC reliably
- ATX 20-pin female to EPS 24-pin male connectors fit standard power headers
- Avoids the cost of replacing a working 20-pin power supply
ATX 20-pin to EPS 24-pin adapter
This adapter converts a standard 20-pin ATX power supply for use with a motherboard requiring a 24-pin ATX connector. It features an 18AWG tinned copper cable measuring 6 inches with a 20-pin female connector on one end and a 24-pin male connector on the other. The unit supports 3.3, 5 and 12V DC delivery.
Sustained load behaviour
The 18AWG tinned copper conductors handle continuous current at the rated voltages without the voltage drop seen in thinner wires. A short 6-inch run minimises resistance so the adapter remains stable during extended operation. It simply passes through the power supply's own regulation and protection.
ATX 24-pin interface limits
The 24-pin connector adds four pins carrying extra 3.3, 5 and 12V lines plus ground compared to the 20-pin version. This adapter supplies those pins from the existing 20-pin source, so total current cannot exceed what the original supply provides. It does not create additional power capacity.
Highlights
- Use your existing 20-pin PSU with a 24-pin motherboard
- 6-inch cable keeps internal wiring short and tidy
- 18AWG tinned copper conductors carry 3.3, 5 and 12V DC reliably
- ATX 20-pin female to EPS 24-pin male connectors fit standard power headers
- Avoids the cost of replacing a working 20-pin power supply
Specifications
| Brand | En-Labs |
|---|---|
| Model | ATX20P224P6 |
| Type | Power |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type: ATX PSU 20pin to EPS 24pin motherboard power adapter cable Wire Gauge: 18AWG Tinned Copper Cable Length: 6 inch Connector A: 1 x ATX 20-pin Female Connector B: 1 x EPS 24-pin Male Voltage:3.3/5/12V DC |
| Connector Number | 2 |
| Terminal Gender | Male to Female |
| Features | nvert your existing standard 20-pin ATX PSU to be used with a motherboard that requires a 24-pin ATX power supply Eliminates the need to purchase an expensive power supply with 24-pin power connector to replace your existing 20-pin power supply |
Questions about this item
Will the 18AWG wires run hot or draw extra power when the adapter stays connected all day?
The 18AWG tinned copper conductors are rated for the 3.3, 5 and 12 V DC lines the ATX connector carries, so normal continuous use adds no measurable heat or power loss.
My power supply only has a 20-pin ATX plug — is that the only thing I need to use this adapter?
Yes, the adapter mates a 20-pin female ATX PSU connector to a 24-pin male motherboard socket; no extra cables or converters are required.
I'm keeping an older 20-pin PSU — will the 6-inch adapter reach the 24-pin socket on a modern board without strain?
At 6 inches long the cable bridges the gap between a standard ATX PSU and a 24-pin motherboard header, leaving enough slack for tidy routing in most chassis.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115473BTC
In stock
