We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA 15-pin male to Molex 4-pin LP4 female power adapter cable

EN-Labs

EN-Labs ADSATA2IDE SATA 15-pin Male to Molex 4-pin LP4 Female internal power cable

SKU CH-3H90-K79ZD

Converts a SATA 15-pin power connector to a Molex 4-pin LP4 female plug for IDE hard drives and optical drives

  • TypePower
  • ColorBlack
  • Length1" - 5"
  • SpecificationsConnector A - SATA Power 15 pin Male Connector B - Molex 4 p
  • Connector Number2
  • Terminal GenderMale to Female
  • Connect IDE drives using a SATA power supply
  • 15-pin SATA male plugs directly into PSU
  • 4-pin LP4 female fits legacy hard drives
  • Powers 2.5 and 3.5 inch devices
  • 12 V and 5 V rails delivered through adapter

SATA-to-Molex power adapter

This 15-pin SATA male to 4-pin LP4 female cable lets you power an IDE hard drive from a modern SATA power connector. It is intended for builders adding legacy storage to a current ATX or EPS power supply.

Voltage and connector limits

The adapter passes 5 V and 12 V DC through two connectors without active regulation. It supports 2.5 and 3.5 inch IDE hard disks, optical drives and other devices that use the large 4-pin interface.

Simple plug-in installation

Push the SATA male end into the PSU lead and the Molex female onto the drive until both seat firmly. Mis-aligned pins or a loose fit are the typical issues that prevent the drive from spinning up.

Highlights

  • Connect IDE drives using a SATA power supply
  • 15-pin SATA male plugs directly into PSU
  • 4-pin LP4 female fits legacy hard drives
  • Powers 2.5 and 3.5 inch devices
  • 12 V and 5 V rails delivered through adapter

Specifications

BrandEn-Labs
ModelADSATA2IDE
TypePower
ColorBlack
Length1" - 5"
SpecificationsConnector A - SATA Power 15 pin Male
Connector B - Molex 4 pin LP4 Female
Voltage - 5V/12V DC
Connector Number2
Terminal GenderMale to Female
FeaturesSATA to LP4 Power Adapter features an LP4 female power connector and a male SATA power connector, allowing you to connect an IDE hard drive to a Serial ATA power connector provided by the computer power supply.
Connects an IDE hard drive and provides power through a Serial ATA connection from your ATX EPS PSU
Compatible with all IDE hard drives
Easy to install

Questions about this item

Should I pick the 1" or the 5" version for a standard ATX case?

The cable length ranges from 1" to 5"; choose the shorter end for tight routing near the PSU or the longer end when the drive bay sits farther away.

What does the 15-pin SATA male actually deliver to my IDE drive?

It carries 5 V and 12 V DC from the PSU through the 15-pin SATA header and presents them on the 4-pin LP4 female so the IDE device receives both voltage rails.

Does the LP4 female end follow the standard Molex pinout for 2.5" and 3.5" drives?

Yes — the 4-pin LP4 female uses the conventional Molex arrangement, so any 2.5" or 3.5" IDE hard drive, optical drive or other large-4P device plugs in directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.