EN-Labs
EN-Labs 5VRGBHUB1X10H 5V AURA RGB Hub 10 Ports 1ft Cable
A 5V AURA RGB hub expands one motherboard header to ten ports for synchronous fan and lighting control, includes a 1ft extension cable and Molex power lead, and mounts with an adhesive pad
- TypeRGB Hub
- Length1 foot
- Cable Length1 ft.
- Features5V AURA RGB Lighting Hub Extend the rare RGB interface on yo
- Control 10 RGB devices from a single 5V motherboard header
- Synchronous lighting across all connected fans and strips
- Extra Molex 5V input prevents motherboard header overload
- 1 ft extension cable plus 1 ft Molex power cable included
- Adhesive backing secures the hub inside the case
5V AURA RGB Hub with Ten Ports
This hub expands a single 5V AURA header on the motherboard to ten ports, letting you drive up to 10 addressable RGB fans or strips in sync. It is built for builders who use 5V AURA-compatible boards from major vendors and need more headers than the board provides.
Passive operation with Molex power option
The hub itself draws no extra power beyond what the motherboard header supplies, typically 15 W at 5 V and 3 A. If connected devices dim, the included Molex cable can feed 5 V directly from the PSU to relieve the header.
Sticky-mount base and short cables included
A 3M adhesive pad on the underside secures the hub inside the case without screws. The package supplies a 1 ft female-to-female RGB extension cable and a 1 ft Molex power cable, so keep runs under 3.3 ft for best signal integrity. Not compatible with 12V RGB headers.
Highlights
- Control 10 RGB devices from a single 5V motherboard header
- Synchronous lighting across all connected fans and strips
- Extra Molex 5V input prevents motherboard header overload
- 1 ft extension cable plus 1 ft Molex power cable included
- Adhesive backing secures the hub inside the case
Specifications
| Brand | EN-Labs |
|---|---|
| Model | 5VRGBHUB1X10H |
| Type | RGB Hub |
| Length | 1 foot |
| Cable Length | 1 ft. |
| Features | 5V AURA RGB Lighting Hub Extend the rare RGB interface on your motherboard to ten. Allow you to Control up to 10 channels RGB fans and lightning synchronously Extra molex 5V power design to avoid RGB head power shortage w/ 3M Self-Stick for PC case internal installation 1FT female to female RGB extension cable include 1FT molex 5V internal power cable include Notes: 1. Generally, 5V RGB interface in motherboard can provide at least 5V/3A(15W) power to periphery RGB device. The RGB hub no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected |
Questions about this item
How do I install the EN-Labs 5V AURA RGB hub and what is the common mistake?
Connect the hub to the motherboard 5V 3-pin header matching the arrow mark to the 5V pin, attach the included Molex cable to the PSU for extra power, and use the sticky pad to mount it; the step often missed is aligning the arrow on every plug with the 5V marking on both motherboard and hub.
What maintenance or replacement will this hub need later?
No routine maintenance is required; if LED strips or fans become dim or flicker, check that total cable runs stay under 3.3 ft and that the Molex power connection remains secure, otherwise the hub itself has no user-serviceable parts.
What limit appears first when running all ten ports continuously?
The motherboard 5V header is typically rated for 15W (5V/3A); exceeding that causes dimming, so the included Molex power cable must be used to avoid the header overload limit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115482BTC
In stock
