EN-Labs
EN-Labs 11-001-246 PWM Fan Hub Splitter Cable 30cm
- Cable Splitters
- Black
$5.99
0.0000717BTC
In stock
EN-Labs
EN-Labs 5 Port PWM Fan Hub Splitter 16 inches
A PWM fan hub expands one motherboard header to five ports with a 16-inch cable and seven-colour LED lighting
- TypeCable Splitters
- ColorMulti-Color
- Length16 inches
- Cable Length1 ft.
- Connector Number6
- Connector Detail4pin PWM female to 5 x TX4 male
Color Multi-Color
- Black
- Multi-Color
- Expands one PWM header to five fans
- 4-pin fans run under PWM speed control
- 3-pin fans operate at full speed
- Magnetic base secures hub inside steel chassis
- 16-inch cable with seven-colour LED lighting
Five-port PWM fan hub
This EN-Labs hub expands a single motherboard 4-pin PWM header into five 4-pin outputs, letting you run up to five fans from one connector. A 16-inch cable provides reach inside the case, and magnetic adsorption secures the splitter to steel or iron chassis. The unit includes a 7-colour LED cable with a switch for manual or automatic colour cycling and a memory function that retains the last setting after power-down.
Check header priority and pin compatibility
Only the channel marked CPU carries an RPM signal back to the motherboard, so connect the primary fan there to retain speed monitoring. The splitter accepts both 3-pin and 4-pin fans, but 3-pin models will run at full speed while 4-pin fans respond to PWM control. Ensure your board has a 4-pin PWM header available and that the 16-inch length suits your routing needs.
Builders needing one-header fan expansion
This suits enthusiasts who want to drive multiple fans from a single PWM header and add coloured LED accent lighting with magnetic mounting. It is not for users who require individual RPM reporting for every fan, since only one tachometer signal is passed through. Builders needing more than five ports or a longer cable run should look at other solutions.
Highlights
- Expands one PWM header to five fans
- 4-pin fans run under PWM speed control
- 3-pin fans operate at full speed
- Magnetic base secures hub inside steel chassis
- 16-inch cable with seven-colour LED lighting
Specifications
| Brand | En-Labs |
|---|---|
| Type | Cable Splitters |
| Color | Multi-Color |
| Length | 16 inches |
| Cable Length | 1 ft. |
| Connector Number | 6 |
| Connector Detail | 4pin PWM female to 5 x TX4 male |
| Features | It is designed for enthusiasts with need for controlling numerous system fans Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM Funciton, Speed control, satisfy your control needs. Featured 7 colors LED lights cable for case DIY Color switch for purple, sky blue, red, white, blue, green, yellow color Switch support auto color switch mode and memory function in case of power-down Compatible with 3-pin / 4-pin Fans Magnetic adsorption for easily fixing the hub in steel & iron chassis |
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What comes in the box and do I need to buy any extra cables?
The hub includes a 16‑inch cable with a 4‑pin PWM input and five TX4 male outputs plus an LED RGB cable; no extra cables are required.
How do I choose between the 3‑pin and 4‑pin fan connections?
Plug 4‑pin PWM fans into any of the five outputs for speed control; 3‑pin fans will run at full speed on the same ports.
What does the single RPM signal on the CPU header mean for my fan monitoring?
Only the fan connected to the CPU‑marked channel sends an RPM reading to the motherboard; the other four fans run at the same PWM duty cycle without individual speed reporting.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114903BTC
In stock
