EN-Labs
EN-Labs .5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable
Connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives, supporting 6Gb/s transfer rates with a 90-degree breakout design for tight spaces
- TypeSAS
- ColorBlue
- Length0.5 Meter
- Connector Number5
- Connector DetailSFF-8087 to 4 X SATA
- Specifications--Serial Attached SCSI (SAS) is a high-speed data storage in
- Connect RAID controller to four SATA drives via single SFF-8087 port
- 6 Gb/s bandwidth per drive for high-throughput storage access
- Right-angle SATA connectors and .5 m length simplify tight chassis routing
- Woven mesh sheath protects conductors while keeping cable flexible
- P1–P4 markers give instant port identification after installation
Internal SAS breakout cable
This 0.5 metre internal cable connects a RAID or PCIe controller with an SFF-8087 port to four discrete SATA drives. It is built for system builders and server administrators who need to attach multiple SATA devices to a single mini SAS host port. The woven mesh sheath covers half the length for easier routing inside chassis.
SFF-8087 to four SATA 6 Gb/s
The single specification that decides fit is the SFF-8087 male host connector breaking out to four SATA female target connectors, each supporting up to 6 Gb/s data transfer per drive. The 36-pin mini SAS interface spans compatible controller arrays across two PCIe 2.0 x8 lanes. Verify your controller presents an SFF-8087 port before purchase.
Passive copper with drain wire
Thermals, noise and power draw are negligible because the assembly is a passive copper cable with a tinned copper drain wire at 30 AWG. No active components generate heat or require cooling. The blue net jacket adds minimal bulk while protecting conductors during installation and long-term use.
Highlights
- Connect RAID controller to four SATA drives via single SFF-8087 port
- 6 Gb/s bandwidth per drive for high-throughput storage access
- Right-angle SATA connectors and .5 m length simplify tight chassis routing
- Woven mesh sheath protects conductors while keeping cable flexible
- P1–P4 markers give instant port identification after installation
Specifications
| Type | SAS |
|---|---|
| Color | Blue |
| Length | 0.5 Meter |
| Connector Number | 5 |
| Connector Detail | SFF-8087 to 4 X SATA |
| Specifications | --Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. --INTERNAL MINI SAS DATA CABLE connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives; Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector --LEVERAGE HARDWARE RAID PERFORMANCE with this SATA multi-lane cable; Connect up to 4 SATA drives to span RAID controller arrays and share performance across two PCI |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Windows Vista | Works with Windows Vista |
Questions about this item
What does the 6 Gb/s bandwidth mean once the cable is installed in a server?
Each of the four SATA drives can transfer data at up to 6 Gb/s, so the cable does not bottleneck modern SSDs or HDDs connected to a compatible RAID or HBA card.
Which interface standard does the SFF-8087 connector use and what does it cap in practice?
The SFF-8087 end uses the SAS 6 Gb/s electrical standard, so the link is limited to 6 Gb/s per lane regardless of the controller’s higher capability.
How much clearance does the 90-degree SATA plug need behind the drive backplane?
The right-angle SATA connectors sit flush against the drive, requiring only the depth of the plug itself plus the 0.5 m cable bend radius for routing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



