EN-Labs
EN-Labs 12 inch Molex 4-pin Male to 2 x SATA 15-pin 90-Degree Splitter Cable Black Net Sleeved
A 12-inch daisy-chained cable splits one Molex 4-pin male connector into two 90-degree SATA 15-pin female connectors with 20AWG copper conductors and a black net sleeve
- TypeCable Splitters
- ColorMulti-Color
- Length11" - 15"
- SpecificationsType :SATA power splitter cable Length:12 inch daisy chained
- Connector Number3
- Terminal GenderMale to Female
- Splits one Molex connector into two SATA power ports
- 12-inch daisy-chained length fits compact builds
- 90-degree SATA plugs ease routing in tight spaces
- Black net sleeving protects wires and improves airflow
- 20AWG copper conductors deliver stable 12V and 5V power
Molex to Dual SATA Power Splitter
This 12-inch adapter converts a single 4-pin Molex connector into two 15-pin SATA power plugs. It uses 20AWG copper conductors to deliver 12V and 5V lines to each drive. The daisy-chained layout keeps the run tidy inside the chassis.
Builders adding SATA drives to older supplies
Ideal for systems that still rely on Molex leads but need to power SSDs or hard drives. Not suited for setups that require straight-angle SATA connectors or longer reach between devices. Buyers needing more than two SATA drops should look at a different splitter.
Black net sleeve aids cable routing
The braided jacket bundles the three leads into one clean run that resists snagging during installation. Each SATA branch sits at a 90-degree angle to ease tight clearances behind drive cages. No software or extra fittings are included in the package.
Highlights
- Splits one Molex connector into two SATA power ports
- 12-inch daisy-chained length fits compact builds
- 90-degree SATA plugs ease routing in tight spaces
- Black net sleeving protects wires and improves airflow
- 20AWG copper conductors deliver stable 12V and 5V power
Specifications
| Type | Cable Splitters |
|---|---|
| Color | Multi-Color |
| Length | 11" - 15" |
| Specifications | Type :SATA power splitter cable Length:12 inch daisy chained Conductor:20AWG Copper Connector A:Molex 4pin male Connector B:2 x SATA 15-pin Female Power supports:12V/5V SATA devices |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | 2 way SATA power splitter adapter. This 12" daisy chained SATA power adapter cable plugs into a 4-pin Molex power plug and provides two 15-pin SATA power connectors for use with SATA drives and SATA power supplies. SATA power connectors provide a Slim profile and 5V & 12V voltage |
Questions about this item
What power connector must the PSU provide for the Molex 4-pin male plug on this cable?
The power supply needs an available 4-pin Molex LP4 output to plug the splitter into.
Will the two 15-pin SATA female connectors on the 12 inch daisy chain power older SATA hard drives and SSDs?
Yes, each connector supplies 12V and 5V so legacy SATA drives and SSDs will operate normally.
How can I confirm the 20AWG copper conductors are delivering power correctly after installation?
Check that both connected SATA drives spin up and appear in the BIOS or operating system.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



