We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8-port PWM fan hub with dual Molex power and 40 cm cable

EN-Labs

EN-Labs 11-001-409RDX 8-port PWM fan hub internal power cable

SKU CH-JYVH-KW0KQ

An eight-port PWM fan hub splits one motherboard header and draws power from dual Molex connectors to run eight 12 V fans simultaneously

  • TypeCable Splitters
  • ColorBlack
  • Connector Number12
  • Expands one motherboard header to eight fans via 40 cm PWM cable
  • Dual Molex power delivers 12 V to eight fans up to 2 A each
  • PWM control synchronises four-pin fan speeds across all ports
  • Three-pin fans run at full speed when connected
  • Red header carries sole RPM signal to motherboard

8-Port PWM Fan Hub

The EN-Labs 11-001-409RDX expands a single motherboard PWM header to support eight fans. It draws 12V power from two Molex connectors on the PSU, reducing load on the board. A 40cm PWM cable is included for the motherboard connection.

Builders needing simultaneous speed control

The hub synchronises PWM fans so they spin at the same speed. Three-pin fans run at full speed only because they lack a PWM signal wire. Only the red header returns an RPM signal to the motherboard; the remaining ports do not report speed.

Red header must connect to a PWM fan

If the red port is left empty or attached to a non-PWM device, the hub locks to full speed and PWM control is lost. Eight onboard capacitors protect each output channel. Self-adhesive backing secures the PCB inside the chassis.

Highlights

  • Expands one motherboard header to eight fans via 40 cm PWM cable
  • Dual Molex power delivers 12 V to eight fans up to 2 A each
  • PWM control synchronises four-pin fan speeds across all ports
  • Three-pin fans run at full speed when connected
  • Red header carries sole RPM signal to motherboard

Specifications

BrandEn-Labs
Model11-001-409RDX
TypeCable Splitters
ColorBlack
Connector Number12

Questions about this item

What does the 12V/2A rating mean when I connect eight fans?

The hub can supply up to 2 A per channel from the PSU, so eight 12 V fans drawing up to 2 A each can run simultaneously without overloading the motherboard header.

How does the dual Molex power input limit the hub in practice?

Two Molex 4-pin connectors deliver 12 V power from the PSU, capping total output at the combined Molex rating and removing load from the motherboard.

What space and mounting options does the board need inside the case?

The PCB includes a self-adhesive pad for sticking to a flat surface, and the 40 cm PWM lead reaches most motherboard headers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.