We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wireless motion sensor kit with wall-mount transmitter and plug-in receiver

Emerson XNS-06 smart sensor kit 12m range 39ft sensing 130ft RF 169ft control

SKU CH-NPBH-SG05N MPN XNS-06

A wireless PIR motion sensor kit activates lights or fans up to 39 ft away and controls outlets through walls up to 169 ft with adjustable timers from 3 s to 1 hr

  • ColorWhite
  • Specifications5.5 L x 5 W x 5 H centimeters, 0.25 pounds, 12 meters, Wall
  • FeaturesWall Mount, 12 meters, true
  • Dimensions14.33in W x 12.83in H x 9.06in D
  • Weight0.25 pounds
  • Detects motion up to 39 ft with 120° view
  • RF signal travels 130 ft through walls and doors
  • Controls devices up to 169 ft away
  • Adjustable timer from 3 s to 1 hr
  • Plug‑and‑play install with adhesive or screws

Wireless motion sensor kit

The Emerson XNS-06 kit pairs a PIR motion transmitter with a plug-in receiver to automate lights, fans or other 110-120V appliances. It operates on battery power and mounts on a wall using the supplied adhesive or screws. No wiring or wall plates are required for installation. The system is intended for indoor use in bathrooms, garages, laundry rooms and similar spaces.

Suits renters and DIY installers

The plug-n-play design works where running new cables is impractical or prohibited, making it suitable for tenants and quick retrofits. The sensing range extends to 39ft with a 120-degree field of view, while the RF signal reaches 130ft through walls. Buyers who need outdoor-rated detection, multi-zone coverage or integration with a smart-home hub should look at other solutions.

12-meter detection range

The sensor detects motion up to 12 meters away and triggers the receiver to switch the connected load. An external rotary timer offers nine preset durations from 3 seconds to 1 hour before the load turns off after motion ceases. Range and ambient-light sensitivity are also adjusted externally on the sensor unit. The kit operates on a lithium-ion battery within a -10 to 45 degree Celsius temperature range.

Highlights

  • Detects motion up to 39 ft with 120° view
  • RF signal travels 130 ft through walls and doors
  • Controls devices up to 169 ft away
  • Adjustable timer from 3 s to 1 hr
  • Plug‑and‑play install with adhesive or screws

Specifications

BrandEmerson
ModelXNS-06, Ball PIR Control Switch Kit
ColorWhite
Part NumberXNS-06
Specifications5.5 L x 5 W x 5 H centimeters, 0.25 pounds, 12 meters, Wall Mount, Battery Powered, Lithium-Ion, Plastic, -10-45 degrees_celsius, Socket, Ball PIR Control Switch Kit, XNS-06, QC002, ISyncPlug
FeaturesWall Mount, 12 meters, true
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.25 pounds

Questions about this item

Does the battery-powered sensor run warm or make any noise when it operates all day?

The PIR sensor is passive and battery-powered, so it produces no audible noise and negligible heat during continuous use.

Which mains voltage must my outlet supply for the receiver to work?

The receiver plugs into a standard 110V-120V socket and controls lights or fans up to the rated load.

Will the RF signal still reach the receiver if I keep my older plasterboard walls in place?

Yes, the 130 ft RF transmit range penetrates walls and doors, so the receiver up to 169 ft away switches reliably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.