Emerson Climate Technologies
Emerson Climate Technologies White-Rodgers 90-295Q Relay Fan 208/240 Vac HVAC Control
A 208/240 Vac SPDT magnetic relay switches 12.5 A resistive loads and single or two-speed fan motors in a totally enclosed, quiet design
- Reliable switching for HVAC systems with 12.5 A contact rating
- Quiet operation from totally enclosed magnetic relay design
- Universal mounting fits 2.13 in × 2.25 in × 1.88 in spaces
- 208/240 Vac coil voltage matches common HVAC control circuits
- 100,000-cycle electrical durability supports long service life
White-Rodgers 90-295Q Relay Fan Control
The White-Rodgers 90-295Q is a magnetic relay designed for HVAC fan motor control. It operates on a 208/240 Vac coil voltage with a 7,000 ohm coil resistance. The unit features a totally enclosed design for quiet operation and universal mounting. It is built for residential and light commercial heating and cooling systems.
Suits single or two-speed fan motors and solenoids
This relay suits technicians servicing resistive loads up to 12.5 A at 125/250 Vac. The SPDT contact form with 12.5 mA current rating handles single or two-speed fan motors and solenoids. Installers needing a different coil voltage, contact configuration, or higher amperage rating should look at other HVAC control relays.
208/240 Vac coil voltage decides compatibility
The single specification that decides fit is the 208/240 Vac coil voltage. The control circuit must supply this exact voltage to actuate the relay reliably. The 7,000 ohm coil resistance and SPDT quick-connect terminals are fixed by this design. Verify the system control voltage before ordering this part.
Highlights
- Reliable switching for HVAC systems with 12.5 A contact rating
- Quiet operation from totally enclosed magnetic relay design
- Universal mounting fits 2.13 in × 2.25 in × 1.88 in spaces
- 208/240 Vac coil voltage matches common HVAC control circuits
- 100,000-cycle electrical durability supports long service life
Specifications
| Brand | WHITE-RODGERS |
|---|
Questions about this item
How do I wire the five quick-connect terminals on this 90-295Q relay?
Match the coil terminals to a 208/240 Vac source and the SPDT contacts to the load; the universal mounting tabs let you snap it into the panel before tightening the quick-connects.
When should I plan to replace the relay based on its rated durability?
The electrical operating durability is rated at 100,000 cycles, so schedule replacement when the fan or solenoid approaches that count.
What is the maximum continuous current the contacts can handle at 240 Vac?
The contact rating is 12.5 A at 125/250 Vac, which is the limit that appears first under sustained resistive or motor loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
