We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount, low-profile arms, mounting plate visible

Emerald Electronics USA

Emerald Electronics USA SM-720-9270 Tilt TV Mount 37-70" 77lb

SKU CH-JDAZ-PSEPE

A low-profile tilt mount holds 37-70 inch screens up to 77 lbs, sits .80 inches from the wall, and tilts 8 degrees downward

  • Mount StyleTilting Low-Profile
  • ColorBlack
  • MovableYes, Tilts
  • TV Weight Capacity77 lbs.
  • VESA Compatible200x200, 400x200, 300x300, 400x400, 600x400
  • Distance from Wall0.80"
  • Tilts 8° downward for glare-free viewing
  • Sits .80" from wall for a slim profile
  • Holds up to 77 lb for large screens
  • Fits VESA 200x200 through 600x400 patterns
  • Factory tested to 308 lb for extra safety

TV Mount for 37-70 Inch Screens

The Emerald SM-720-9270 is a tilting low-profile wall bracket built for flat-panel televisions measuring 37 to 70 inches diagonally. It supports a maximum load of 77 lbs and fits VESA patterns of 200x200, 300x300, 400x200, 400x400 and 600x400 mm. The steel construction holds the screen just 0.80 inches from the wall. All mounting hardware is included in the box.

Suits Tilt-Only Needs; Not Full Motion

This mount suits viewers who want a fixed distance from the wall with the ability to angle the screen downward up to 8 degrees for glare reduction. It does not swivel left or right, nor does it extend away from the wall. Buyers who need lateral articulation or a pull-out arm should look at a full-motion articulating arm instead.

Simple Stud Install; Check VESA First

Installation requires locating wall studs or a solid masonry surface to support the 77 lb rating. The package supplies lag bolts and concrete anchors along with a paper template. The most common issue is discovering the TV's VESA holes do not match the listed patterns after the bracket is already mounted. Verify the pattern before drilling.

Highlights

  • Tilts 8° downward for glare-free viewing
  • Sits .80" from wall for a slim profile
  • Holds up to 77 lb for large screens
  • Fits VESA 200x200 through 600x400 patterns
  • Factory tested to 308 lb for extra safety

Specifications

BrandEmerald
ModelSM-720-9270
Mount StyleTilting Low-Profile
ColorBlack
MovableYes, Tilts
TV Weight Capacity77 lbs.
VESA Compatible200x200, 400x200, 300x300, 400x400, 600x400
Distance from Wall0.80"
Tilt Range8 degrees downward
UL CertifiedETL Listed
Cable ManagementYes
FeatureModel #: SM-720-9270 Tilts +0° to -8° Distance from wall 0.80” Rated 77lb. factory tested to hold 4 times its weight totaling 308 VESA patterns: 200x200, 400x200, 300x300, 400x400, 600x400 Product dimensions: 14”(L)x8”(W)x2”(H)
Weight2.5 lbs

Questions about this item

Does my TV need a specific VESA pattern like 400x400 or 600x400 to fit this mount?

The bracket supports 200x200, 300x300, 400x200, 400x400 and 600x400 mm patterns, so most 37-70 inch sets will match one of those hole spacings.

Will the 0.80 inch low-profile design still let me tilt a heavier 77 lb screen downward?

Yes, the steel frame is factory tested to four times the rated load (308 lbs total) and provides a full 8 degrees of downward tilt even at maximum capacity.

How can I confirm the tilt mechanism is working correctly after installation?

Gently push the top of the TV forward; it should move smoothly from flat (0°) to the full -8° stop without binding, then spring back when released.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.