We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 22cm black cables with 4-pin floppy male and 15-pin SATA female connectors

eMagTech 679-EL 4Pin Floppy Male to 15Pin SATA Female Adapter Cable 22cm 2pcs

SKU CH-Y2WH-0ZFZ5

Converts a 4-pin floppy power connector to a 15-pin SATA female connector, 22 cm cable, pack of two

  • TypeFloppy, SATA
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • Converts 4-pin floppy power to 15-pin SATA power
  • 22 cm length suits tight case routing
  • Two cables included for spare or dual use
  • PVC construction resists wear during repeated swaps
  • Designed for floppy drives only, not hard drives

Converts 4-pin floppy power to 15-pin SATA

This adapter cable converts a 4-pin floppy male connector from a power supply into a 15-pin female SATA power connector. It is designed specifically for powering floppy drives and must not be connected to a hard drive. The 22cm length provides flexibility for internal routing. A pack of two cables is included for spare or dual-drive configurations.

Replaces missing SATA power connectors

Use this adapter when a power supply lacks native SATA power leads but retains a 4-pin floppy connector. The jump is worth it when adding a floppy drive or SATA-powered peripheral to an older PSU without replacing the unit. It is not for builders who need to power standard hard drives or SSDs from a floppy rail.

Fits into legacy power supply builds

The male-to-female design plugs directly into the PSU's 4-pin floppy output and accepts a standard SATA power plug. PVC construction ensures durability for long-term use. The short cable keeps clutter low inside the case. It frees up the need for a dedicated SATA power header on the power supply itself.

Highlights

  • Converts 4-pin floppy power to 15-pin SATA power
  • 22 cm length suits tight case routing
  • Two cables included for spare or dual use
  • PVC construction resists wear during repeated swaps
  • Designed for floppy drives only, not hard drives

Specifications

BrandeMagTech
Model679-EL
TypeFloppy, SATA
Connector DetailSata
Terminal GenderMale-to-Female

Questions about this item

Will the 22cm cable reach my drive from the PSU floppy connector?

The 22cm length adds a short extension from the 4-pin floppy male plug to the 15-pin SATA female socket, so measure that distance inside your case before fitting.

Which side of the 4-pin floppy male plug faces up when inserting it into the PSU?

The keyed 4-pin floppy male connector only seats one way; align the chamfered corners with the PSU socket and press firmly until it clicks.

How often should I replace the two PVC adapter cables in a running system?

Inspect the PVC jacket and both connectors during any hardware change; swap a cable if you see cracked insulation, bent pins or intermittent power to the floppy drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.