ELMCONFIG 1100mAh Cordless Soldering Iron Kit 15W
A 15 W cordless soldering iron with a 1100 mAh battery heats to 788 °C in 10 seconds and runs for 30 minutes per charge
- Watts15 watts
- Cordless freedom with built-in 1100mAh rechargeable battery
- Ready to solder in 10 seconds reaching 788°
- 30 minutes runtime from full USB charge
- Simple five-press power control with colour battery indicator
- Includes stand, sponge, tips, tin wire and USB cable
Cordless Soldering Iron Kit
This 15-watt soldering iron runs on a built-in 1100mAh lithium-ion cell and charges through a USB-C port. The cordless design removes cable length limits so the tool can be used anywhere for circuit board work, appliance repair, jewellery making or general DIY tasks. A metal stand, cleaning sponge, anti-scald cover, tin wire tube and electric welding head are included in the package.
Sustained Heat Performance
Press and hold the power button for ten seconds to reach a tip temperature of 788 degrees for effective soldering. The iron stays hot only while the button is held, then cools to a safe handling temperature within one minute when rested in the kickstand. A full charge delivers up to 30 minutes of total working time before the 1000mAh capacity battery requires recharging.
Battery Capacity Decides Suitability
The 1100mAh cell determines how long the iron can operate away from a power source, making it the key figure for buyers who need uninterrupted portable use. Users requiring longer continuous sessions or higher power for heavy joints will find the runtime and 15-watt output insufficient for those demands.
Highlights
- Cordless freedom with built-in 1100mAh rechargeable battery
- Ready to solder in 10 seconds reaching 788°
- 30 minutes runtime from full USB charge
- Simple five-press power control with colour battery indicator
- Includes stand, sponge, tips, tin wire and USB cable
Specifications
| Watts | 15 watts |
|---|
Questions about this item
How much power does the 15 W iron draw from its 1100 mAh cell during a full-day session?
The 15 W rating is the heating power; the 1100 mAh battery delivers roughly 30 minutes of continuous use before needing a USB recharge.
What separate power source is required to charge the kit between jobs?
Any standard USB port or USB power bank can charge the iron via the supplied USB-C cable; no proprietary charger is needed.
Will the included stand and sponge work with the same tips I use on my bench-top station?
The kit ships with its own electric welding head and anti-scald cover; the metal stand and cleaning sponge are sized for those supplied tips.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
