ELFJMZP IDE Molex 4 Pin 1-to-4 Power Splitter Cord 40cm 18AWG Black
Splits one Molex 4-pin port into four female connectors for fans, drives and other Molex devices using a 40 cm 18 AWG cable
- TypeBlack
- ColorBlack
- Connector DetailIde Molex 4 Pin to Male-to-Female
- Terminal GenderMale to Female
- SpecificationsBlack, 15.7 L x 1.02 W x 0.71 H inches, 0.06 pounds
- ShieldingBlack
- Expands one Molex port into four female connectors
- 40 cm length aids internal cable routing
- 18 AWG tinned copper wire carries 12 V and 5 V reliably
- Locking clips on connectors prevent accidental disconnection
- Plug-and-play design needs no tools for installation
1-to-4 Molex Power Splitter
This 40cm cable converts a single 4-pin IDE Molex male connector into four female ports. It uses 18AWG tinned copper wire rated for standard 12V and 5V ATX power delivery. The black PVC jacket measures 15.7 inches in length with a compact 1.02 inch width profile. It adds three extra power connections for internal drives or cooling fans.
Who this suits and who should look elsewhere
Builders adding multiple case fans, legacy hard drives or optical drives to a standard ATX supply will find the four female connectors convenient. The secure locking clips help prevent accidental unplugging during assembly or transport. It is not for systems that lack a large 4-pin D-type Molex source port. It is also unsuitable for anyone needing to draw more than the source port's rated capacity across all four outputs.
Deciding specification: 18AWG wire gauge
The 18AWG conductor size determines the safe current-carrying limit for the entire splitter assembly. Every device plugged into the four female connectors shares this single wire path back to the power supply. Exceeding the port's typical 150W limit risks voltage drop, overheating or connector damage. Check the combined draw of all attached components before connecting.
Highlights
- Expands one Molex port into four female connectors
- 40 cm length aids internal cable routing
- 18 AWG tinned copper wire carries 12 V and 5 V reliably
- Locking clips on connectors prevent accidental disconnection
- Plug-and-play design needs no tools for installation
Specifications
| Brand | ELFJMZP |
|---|---|
| Type | Black |
| Color | Black |
| Connector Detail | Ide Molex 4 Pin to Male-to-Female |
| Terminal Gender | Male to Female |
| Specifications | Black, 15.7 L x 1.02 W x 0.71 H inches, 0.06 pounds |
| Shielding | Black |
| Construction | 18awg |
| Features | Black |
| Disclaimer | not_applicable |
Questions about this item
Does the splitter ship with any extra cables or adapters, or is the 40 cm 1-to-4 Molex cord the only item in the package?
The package contains only the single 40 cm splitter cable with one male and four female Molex connectors; no additional cables, adapters or mounting hardware are included.
Should I pick a different wire gauge or length for a compact build, or is the 18 AWG 40 cm version the right choice?
This model is offered only in 18 AWG and 40 cm length; the 18 AWG tinned copper conductors handle standard 12 V / 5 V Molex loads while the 40 cm reach suits most mid- and full-tower layouts.
The spec mentions ~150 W per Molex port — what does that mean when I plug four fans or drives into this splitter?
The 150 W limit applies to the single PSU port feeding the splitter, so the combined draw of all four connected devices must stay within that ceiling to avoid voltage drop or overheating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
