We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large junction box with two 100W 24V drivers

Elemental LED

Elemental LED VLM 200W 24V LO-PRO Large Junction Box Double Driver Ballast

SKU CH-TNV5-QQVY4

A 24 V, 200 W low-profile junction box containing two 100 W VLM drivers for LED installations

  • typeBallasts
  • High-efficiency 24 V drivers with compact UL-listed design
  • Double 100 W drivers deliver 200 W total power
  • LO-PRO large junction box simplifies multi-driver installation
  • Advanced 3D layout minimises noise and optimises energy flow
  • Precision potting conducts heat uniformly for thermal efficiency

LO-PRO Large Junction Box

This 24V ballast kit combines one LO-PRO large junction box with two 100W VLM drivers for a 200W total capacity. It is intended for installers who need a compact, UL-listed power supply for low-voltage LED lighting projects. The potted construction conducts heat uniformly to the housing for reliable thermal performance in tight spaces.

200W total capacity across two 100W drivers

Each driver delivers 100W at 24V, giving comfortable headroom for extended LED runs without voltage drop. The dual-driver layout lets you balance loads across two circuits or combine them for a single larger zone. When the connected load approaches the combined 200W limit, you reach the practical ceiling and would need an additional junction-box-and-driver set.

Replaces bulky single-driver enclosures

The LO-PRO profile and 3D-optimised board layout shrink the footprint compared with traditional driver boxes, freeing space in cabinets and plenums. The jump is worth it when the existing enclosure is too deep for the mounting cavity or when thermal noise from older drivers causes flicker. It does not suit installations that require a single driver above 100W or voltages other than 24V.

Highlights

  • High-efficiency 24 V drivers with compact UL-listed design
  • Double 100 W drivers deliver 200 W total power
  • LO-PRO large junction box simplifies multi-driver installation
  • Advanced 3D layout minimises noise and optimises energy flow
  • Precision potting conducts heat uniformly for thermal efficiency

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

Will the double VLM driver setup run from my existing 24 V low-voltage wiring?

Yes, each of the two included drivers is rated for 100 W at 24 V, so the combination delivers 200 W on the same 24 V bus you already have.

How can I confirm both drivers are operating correctly after installation?

Verify that the total load draws up to 200 W at 24 V without flicker, and check that each driver’s UL-listed label is visible through the junction-box cover.

What components arrive in the package and what must I source separately?

The box contains one LO-PRO large junction box and two 100 W 24 V VLM drivers; you will need to supply the 24 V input cable, LED tape or fixtures, and any dimming or control accessories.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.