Elemental LED MikroDim Electronic Dimmable Driver 24V 60W ballast

Compact 24V 60W dimmable driver

The Elemental LED MikroDim is an electronic dimmable driver rated for 24 volts and 60 watts. It suits installers who need a low-voltage power supply for LED tape or fixtures in residential and light-commercial projects. The unit operates with no minimum load, so short runs dim smoothly without flicker. It is a new component intended for indoor lighting circuits.

60-watt capacity and short-circuit protection

The driver delivers up to 60 watts of continuous power, comfortably running typical accent and cove lighting loads. When the connected load exceeds that rating the unit hits its limit and will not sustain the extra demand. Built-in short-circuit protection shuts the output down safely during a fault, then recovers once the wiring is corrected. The patented design targets consistent dimming performance across the full range.

Wiring-friendly form factor

A compact enclosure lets the driver sit inside standard junction boxes or tight ceiling voids without forcing oversized cut-outs. Input and output leads are sized for straightforward wire-nut connections to 24-volt LED runs. The dimming input accepts common phase-cut dimmers, so electricians can use existing wall controls without extra interfaces. California Proposition 65 notices apply to materials inside the housing.