We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black electronic driver with terminals and label

Elemental LED

Elemental LED DIODE LED DI-TD-12V-30W OMNIDRIVE Ballast

SKU CH-MSTW-YC1MT

12 V dimmable driver delivers 30 W output with smooth 10 % to 100 % dimming across TRIAC, MLV, ELV and incandescent switches

  • typeBallasts
  • Smooth dimming from 100% down to 10%
  • Eliminates flicker with built-in electronic filter
  • Works with TRIAC, MLV and ELV dimmers
  • 30W output at 12V for LED strips
  • Compatible with 3-way, 4-way and 5-way switches

12V 30W Dimmable LED Driver

The Elemental LED DIODE LED DI-TD-12V-30W OMNIDRIVE Ballast is a 12V electronic dimmable driver rated at 30W. It is designed for indoor lighting installations that require smooth dimming control. Installers and specifiers working with low-voltage LED tape or fixtures will find it compatible with a wide range of dimming switches. It is not suited for buyers who need higher wattage capacity or non-dimmable constant-voltage operation.

Thermals Noise and Power Draw

The unit draws up to 30W at 12V output and operates silently with no moving parts. An integrated electronic filter removes flicker and enables continuous dimming from 100% down to 10% without audible noise. Heat is dissipated through the enclosure during normal use. The product carries a California Proposition 65 notice regarding reproductive-harm chemicals.

Replaces and Upgrades

This driver replaces magnetic or basic electronic transformers that lack broad dimmer compatibility or exhibit flicker at low levels. The upgrade is worthwhile when a project demands reliable performance with TRIAC, MLV, ELV or incandescent dimmers, plus 3/4/5-way switching support. It does not address installations requiring 0-10V, DALI or DMX control protocols.

Highlights

  • Smooth dimming from 100% down to 10%
  • Eliminates flicker with built-in electronic filter
  • Works with TRIAC, MLV and ELV dimmers
  • 30W output at 12V for LED strips
  • Compatible with 3-way, 4-way and 5-way switches

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How is the 12V OMNIDRIVE driver wired to the mains and the LED load, and what is the step most installers miss?

Connect the mains input to a compatible TRIAC, MLV, ELV or incandescent/halogen dimmer switch, then wire the 12V output to the LED load; the step often missed is confirming the dimmer type before wiring because not all dimmers work with the driver.

What maintenance or replacement will the 30W driver need during its service life?

The sealed electronic driver has no user-serviceable parts; if the output drifts or the unit fails after extended operation, the whole driver is replaced rather than repaired.

What is the first limit reached when the driver runs continuously at full 30W output?

Thermal protection engages first; sustained maximum load raises internal temperature until the built-in safeguard reduces output or shuts the unit down to prevent damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.