We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Low-profile steel junction box with 24V 80W dimmable driver

Elemental LED

Elemental LED DI-TD-24V-80W-LPL LO-PRO Jct Box Driver Combo

SKU CH-BWDQ-DGRJ5

Low-profile junction box with 24V 80W dimmable driver covering 10 to 100 percent range

  • typeBallasts
  • Smooth dimming from 100% down to 10%
  • Compatible with TRIAC, MLV, ELV and incandescent dimmers
  • Built-in electronic filter eliminates flicker
  • Low-profile steel junction box separates line and low voltage wiring
  • 24 V, 80 W OMNIDRIVE driver powers LED installations

Low-Profile Junction Box Driver Combo

The Elemental LED DI-TD-24V-80W-LPL combines a rugged steel junction box with an 80W OMNIDRIVE electronic dimmable driver. It supplies 24V power to LED lighting systems and fits installations where enclosure height is limited. The integrated design separates household and low-voltage wiring to meet electrical code requirements.

Installers needing code-compliant dimming for 24V

This unit suits electricians and specifiers who require smooth 100% to 10% dimming across TRIAC, MLV, ELV and incandescent dimmer switches. The built-in electronic filter removes flicker for consistent output. Projects that demand a driver above 80W or a voltage other than 24V must select a different power supply.

80W OMNIDRIVE dimmable driver at 24V

The single specification that decides fit is the 80W rating at 24V output. It determines the maximum LED load the combo can support and confirms compatibility with 24V tape, modules or fixtures. Verify the total connected wattage against this limit before purchase.

Highlights

  • Smooth dimming from 100% down to 10%
  • Compatible with TRIAC, MLV, ELV and incandescent dimmers
  • Built-in electronic filter eliminates flicker
  • Low-profile steel junction box separates line and low voltage wiring
  • 24 V, 80 W OMNIDRIVE driver powers LED installations

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

What voltage must my LED tape run at to work with this 24 V 80 W OMNIDRIVE driver?

The driver supplies 24 V, so the connected LED tape must be rated for 24 V operation.

Can I keep my current TRIAC dimmer when installing this OMNIDRIVE driver?

Yes, the OMNIDRIVE driver is compatible with TRIAC, MLV, ELV and incandescent/halogen dimmer switches.

How can I confirm the driver is dimming smoothly after installation?

Verify that the light output dims from 100 % down to 10 % without flicker when using a compatible dimmer.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.