We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular 12V 10W dimmable LED driver

Elemental LED

Elemental LED DI-TD-12V-10W OMNIDRIVE Ballast

SKU CH-6SQH-W6SHZ

12V 10W dimmable LED driver works with TRIAC, MLV, ELV and incandescent dimmers for smooth 100% to 10% dimming without flicker

  • typeBallasts
  • Smooth dimming from 100% down to 10% with built-in electronic filter
  • Compatible with TRIAC, MLV, ELV and incandescent/halogen dimmer switches
  • 10W output at 12V for low-voltage LED installations
  • Works with 3/4/5-way and on/off switching configurations
  • California Proposition 65 warning: contains chemical known to cause reproductive harm

12V OMNIDRIVE Dimmable Driver

The Elemental LED DI-TD-12V-10W OMNIDRIVE is a 10W electronic ballast designed for 12V LED lighting installations. It provides smooth dimming performance from 100% down to 10% using a built-in electronic filter that eliminates flicker. This driver suits residential or commercial projects requiring reliable, low-voltage power conversion.

Compatibility checks before ordering

Verify that your LED load operates at 12V and does not exceed the 10W maximum output. Confirm your dimmer switch is a TRIAC, magnetic low voltage, electronic low voltage, or incandescent/halogen type for proper operation. Ensure the wiring environment supports the driver's input voltage and that the installation location meets local electrical codes.

Ideal for single-zone LED strips

This unit fits projects needing one dimmable 12V circuit up to 10W, such as under-cabinet or accent lighting. It is not for buyers who need higher wattage capacity, multiple independent output channels, or drivers compatible with 0-10V or DALI control protocols. Installations requiring non-dimmable constant voltage should look at alternative power supplies.

Highlights

  • Smooth dimming from 100% down to 10% with built-in electronic filter
  • Compatible with TRIAC, MLV, ELV and incandescent/halogen dimmer switches
  • 10W output at 12V for low-voltage LED installations
  • Works with 3/4/5-way and on/off switching configurations
  • California Proposition 65 warning: contains chemical known to cause reproductive harm

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

What is included with the DI-TD-12V-10W OMNIDRIVE driver and is any extra wiring required?

The package contains the 10 W, 12 V OMNIDRIVE dimmable driver unit. Low-voltage wire and LED tape or fixtures must be purchased separately.

Should I choose this 10 W model or a higher-capacity version for my LED run?

Select the 10 W unit when the total connected load is at or below 10 watts; for longer runs add the wattage of each strip section and move to the next driver size if the sum exceeds 10 W.

What does the 100 % to 10 % dimming range mean once the driver is installed?

Paired with a compatible TRIAC, MLV, ELV or incandescent dimmer, the driver dims smoothly from full brightness down to roughly one-tenth output without flicker.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.