Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920462BTC
In stock
Elemental LED
Elemental LED DI-JBOX-LPS3R LO-PRO Wet Location Junction Box
A low-profile NEMA 3R junction box rated for wet locations and certified to UL 2108, UL 508A and UL 1598
- typeBallasts
- NEMA 3R rated enclosure shields components from weather
- UL 2108 certified for safe power-supply installations
- UL 508A listed for industrial control panel use
- UL 1598 compliant for luminaire safety standards
- Engineered in Reno, Nevada for reliable outdoor performance
Purpose and Fit
The Elemental LED DI-JBOX-LPS3R LO-PRO Wet Location Junction Box is a NEMA 3R rated outdoor enclosure built to shelter power supplies and other electrical components from weather and environmental hazards. It is intended for installers who need a low-profile box that meets strict safety standards for wet or damp locations.
Upgrade Path
This junction box replaces basic enclosures that lack NEMA 3R ingress protection or the UL certifications required for wet-location power-supply installations. The jump is justified when local code demands UL 2108, UL 508A, and UL 1598 compliance for the assembled lighting system.
Practical Limits
The NEMA 3R rating guards against falling rain, sleet, and external ice formation but does not protect against submersion or high-pressure water jets. The enclosure carries UL 2108, UL 508A, and UL 1598 listings, so any internal components must also be rated for the same wet-location standards to maintain the overall certification.
Highlights
- NEMA 3R rated enclosure shields components from weather
- UL 2108 certified for safe power-supply installations
- UL 508A listed for industrial control panel use
- UL 1598 compliant for luminaire safety standards
- Engineered in Reno, Nevada for reliable outdoor performance
Specifications
| Brand | DIODE LED |
|---|---|
| type | Ballasts |
Questions about this item
What clearance does the NEMA 3R junction box need for mounting on an exterior wall?
The LO-PRO enclosure is UL 2108, UL 508A and UL 1598 listed for wet locations, so it must be mounted with its gasketed cover sealed and the knockouts oriented downward to shed water.
Which step do installers most often miss when wiring the LO-PRO junction box?
Forgetting to torque the grounding screw and to apply the supplied silicone sealant to every cable entry before closing the cover, which voids the NEMA 3R rating.
What part of the junction box will need inspection or replacement after prolonged outdoor exposure?
The gasket and any conduit fittings should be checked annually; UV degradation or compression set can compromise the wet-location seal certified under UL 1598.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
