We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small grey junction box with integrated 12V 60W LED driver, wet-location rated

Elemental LED

Elemental LED DI-DV-12V60W-277-LPS3R Wet Loc Jct Box Driver Combo 12V 60W Ballast

SKU CH-RVJH-M81ER

A 12 V constant-voltage driver rated at 60 W, housed in a NEMA 3R wet-location junction box and certified to UL 2108, UL 508A and UL 1598 for 120–277 VAC input

  • typeBallasts
  • 12V constant-voltage output drives compatible LED loads
  • 60W capacity powers extended low-voltage runs
  • 120-277VAC input suits commercial and residential supply
  • NEMA 3R junction box protects driver from wet locations
  • UL 2108, 1598 and 508A listings confirm safety compliance

Product Identity

The Elemental LED DI-DV-12V60W-277-LPS3R is a 12V constant voltage driver and NEMA 3R junction box combo rated at 60W. It accepts 120-277VAC input and carries UL 2108, UL 508A and UL 1598 certifications. The enclosure provides wet-location protection for outdoor or harsh environments.

Suitable Installations

This unit suits low-voltage LED runs that require a weatherproof, hard-wired power supply compatible with 120V switches, REIGN dimmers or RGB/DMX controls. It is not for projects needing higher wattage, different output voltages or non-NEMA 3R enclosures.

Deciding Specification

The single specification that decides fit is the 12V 60W constant voltage output paired with a 120-277VAC input range. Verify your load and supply voltage against these figures before purchase.

Highlights

  • 12V constant-voltage output drives compatible LED loads
  • 60W capacity powers extended low-voltage runs
  • 120-277VAC input suits commercial and residential supply
  • NEMA 3R junction box protects driver from wet locations
  • UL 2108, 1598 and 508A listings confirm safety compliance

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How do I confirm the driver is outputting 12 V after installation?

Measure the secondary terminals with a multimeter set to DC volts; a steady reading at or near 12 V under load shows the constant-voltage driver is working as intended.

What components are included and what must I supply myself?

The combo includes the LO-PRO NEMA 3R junction-box enclosure with the 60 W 12 V constant-voltage driver pre-mounted; you must provide 120-277 VAC supply wiring, low-voltage LED load wiring and any conduit fittings.

Which version suits a 60 W 12 V LED load on a 277 V circuit?

This single SKU is rated 60 W at 12 V constant voltage with a 120-277 VAC input range, so it covers that exact requirement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.