We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey junction-box driver combo with cable glands

Elemental LED

Elemental LED DI-DM-MW24V60W-0-10V-LPS3R LO-PRO Wet Loc Jct Box Driver Combo 24V ballast

SKU CH-22G5-TB2JY

A 24-volt, 60-watt dimmable LED driver in a NEMA 3R wet-location junction box for commercial 0-10V lighting control

  • typeBallasts
  • Commercial 0-10V dimming for smooth control
  • 60W Class 2 output powers low-voltage LED runs
  • NEMA 3R enclosure rated for wet locations
  • UL 2108, UL 508A, UL 1598 certified safety
  • Engineered in Reno Nevada by Elemental LED

Wet Location Junction Box Driver Combo

The Elemental LED DI-DM-MW24V60W-0-10V-LPS3R combines a LO-PRO NEMA 3R junction box with a commercial-grade 24V driver. This integrated unit is built for installers fitting low-voltage LED fixtures in outdoor or damp environments. It carries UL 2108, UL 508A and UL 1598 certifications for power supplies and electrical components. The assembly is engineered by Elemental LED Inc. in Reno, Nevada.

Suited for 0-10V commercial retrofits.

This combo serves contractors wiring 0-10V dimming controls in commercial buildings or retrofit projects. The Class 2 driver delivers smooth, continuous dimming across the control range. It is rated for both wet and dry locations. Installations that do not use 0-10V control systems should look at a different power supply type.

60W Class 2 24V output

The driver provides a 60W maximum output at 24V DC under Class 2 limits. This single power rating determines how many fixtures the unit can support. Match the total connected load to this figure when specifying the driver.

Highlights

  • Commercial 0-10V dimming for smooth control
  • 60W Class 2 output powers low-voltage LED runs
  • NEMA 3R enclosure rated for wet locations
  • UL 2108, UL 508A, UL 1598 certified safety
  • Engineered in Reno Nevada by Elemental LED

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How do I mount the NEMA 3R junction box and connect the 0-10V dimming wires?

Secure the box to a flat surface using its mounting tabs, route line-voltage supply through one knockout and low-voltage LED leads through another, then land the 0-10V control pair on the driver’s purple and grey terminals — the step often missed is keeping the dimming conductors separated from the 24 V output to prevent signal noise.

Which component will need replacement first in a commercial installation?

The 60 W Class 2 driver is the wear item; its electrolytic capacitors degrade with heat cycles, so plan on swapping the driver module after roughly 50 000 operating hours while the NEMA 3R enclosure itself remains serviceable.

What thermal limit appears first when the driver runs at full 60 W continuously?

The built-in overtemperature protection trips once the driver’s internal case temperature exceeds its UL 2108 rated limit, shutting down output until the unit cools — this is the first boundary reached under sustained maximum load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.