We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black rectangular LED driver unit with side cable entries

Elemental LED

Elemental LED DI-0906 60W 12V Constant Voltage Driver

SKU CH-74P2-EDSGK

A 12V 60W Class 2 constant-voltage LED driver for hard-wired low-voltage lighting systems

  • typeBallasts
  • 12V DC constant voltage driver for low-voltage LED systems
  • Class 2 rated 60W output for safe operation
  • Compatible with 120V switches and low voltage dimmers
  • Works with RGB and DMX control systems
  • Hard-wired power supply in multiple form factors

Product identity

This Elemental LED DI-0906 is a 60W 12V constant voltage driver built for low-voltage LED installations. It suits electricians and installers who need a Class 2 power supply that pairs with 120V switches, low voltage dimmers and RGB or DMX controls.

Thermals noise and power

The unit delivers a steady 12V DC output at up to 60W for compatible LED loads. As a constant voltage driver it regulates voltage rather than current, so thermal behaviour follows the attached lighting load and the enclosure in which it is mounted.

Deciding specification

The single figure that determines fit is the 60W rating at 12V; the connected LED system must not exceed this power level. Buyers who need more output capacity or a different output voltage cannot use this driver.

Highlights

  • 12V DC constant voltage driver for low-voltage LED systems
  • Class 2 rated 60W output for safe operation
  • Compatible with 120V switches and low voltage dimmers
  • Works with RGB and DMX control systems
  • Hard-wired power supply in multiple form factors

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How do I hard-wire the 120V input to the 12V DC driver?

Connect the 120V supply wires to the driver's input terminals and the 12V LED load to the output terminals, ensuring correct polarity on the low-voltage side.

Will the driver need any maintenance or replacement parts over time?

No user-serviceable parts are inside; the sealed unit is replaced entirely if it fails after extended operation.

What is the maximum load I can run continuously on this 60W unit?

The Class 2 rating limits sustained output to 60W at 12V, so the connected LED load must not exceed that total wattage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.