We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact steel junction box with integrated 12V 20W driver

Elemental LED

Elemental LED DI-0904-LPS LO-PRO Junction Box Driver Combo 12V DC 20W Ballast

SKU CH-YJZX-9S2V8

A low-profile steel junction box with a 12V DC 20W constant-voltage driver for code-compliant low-voltage LED lighting

  • typeBallasts
  • Low-profile steel enclosure separates household and low-voltage wiring safely
  • 12 V DC constant-voltage output pairs with 120 V switches and dimmers
  • Class 2 rated 20 W driver limits power for code-compliant installations
  • Hard-wired power supply integrates directly into low-voltage LED lighting circuits
  • Rugged junction-box design meets electrical-code requirements for wiring separation

LO-PRO Junction Box Driver Combo

The Elemental LED DI-0904-LPS combines a low-profile steel junction box with a 12V DC constant voltage driver rated at 20W. It is designed for installers who need code-compliant separation of 120V household wiring from low-voltage LED circuits in a compact enclosure.

Hard-wired installation

The rugged steel box meets electrical codes that require physical separation of line and low-voltage conductors. Wiring is hard-wired on both sides; the low-profile form factor fits tight cavities but demands careful cable management to avoid pinching leads against the cover.

Verify voltage, wattage

Confirm the LED load operates at 12V DC and does not exceed the 20W Class 2 limit. This driver pairs with 120V switches, low-voltage dimmers or RGB/DMX controls; ensure your control scheme matches one of those methods. Check that the mounting location accommodates the box dimensions and local inspection requirements.

Highlights

  • Low-profile steel enclosure separates household and low-voltage wiring safely
  • 12 V DC constant-voltage output pairs with 120 V switches and dimmers
  • Class 2 rated 20 W driver limits power for code-compliant installations
  • Hard-wired power supply integrates directly into low-voltage LED lighting circuits
  • Rugged junction-box design meets electrical-code requirements for wiring separation

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How can I verify the 12V DC 20W driver is operating correctly after hard-wiring it?

Measure the output with a multimeter to confirm a steady 12 V DC under load; the Class 2 rating means voltage stays within safe limits when the connected LED strip draws up to 20 W.

What components arrive in the LO-PRO Junction Box Driver Combo and what must I supply?

The combo includes the low-profile steel junction box with the integrated 12V DC constant-voltage driver; you must provide 120 V AC supply wiring, low-voltage LED load wiring, and any compatible dimmer or RGB/DMX controller.

Which version of the DI-0904-LPS should I choose for a 12V LED installation?

Select the 12V DC 20W constant-voltage model listed as DI-0904-LPS; it matches 12 V LED strips and supports up to 20 W of load within a code-compliant steel enclosure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.