We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular junction box with integrated driver, matte grey finish, weather-sealed enclosure

Elemental LED

Elemental LED 24V 90W 0-10V LPS3R LO-PRO Wet Loc Jct Box Driver Combo ballast

SKU CH-ASQM-0DSYQ

Combines a 24V 90W 0-10V dimmable driver with a NEMA 3R wet-location junction box certified to UL 2108, UL 508A and UL 1598

  • typeBallasts
  • Commercial-grade 0-10V dimming for smooth control
  • 90W Class 2 output powers demanding LED loads
  • 24V low-voltage design suits commercial installations
  • NEMA 3R junction box rated for wet locations
  • Certified to UL 2108, UL 508A and UL 1598

Commercial 0-10V LED driver combo

This 24-volt ballast combines a 90-watt Class 2 driver with a NEMA 3R junction box for wet-location installations. It is built for commercial projects that use 0-10V control systems and need smooth, continuous dimming. The unit suits contractors and facility managers specifying low-voltage LED fixtures in retail, hospitality or architectural lighting.

NEMA 3R enclosure with UL listings

The LO-PRO junction box carries UL 2108, UL 508A and UL 1598 certification, protecting the driver against weather and environmental hazards in outdoor or damp indoor settings. Its compact profile allows mounting in tight plenums or surface runs where a standard box would not fit. The integrated wiring compartment keeps connections inside the rated enclosure, reducing on-site labour.

Replaces separate driver and box assemblies

Projects that previously specified a standalone driver plus a separate weatherproof enclosure can consolidate to this single listed assembly. The jump is worthwhile when a 0-10V dimming infrastructure already exists and a 90-watt Class 2 limit matches the load. Installations needing higher wattage, a different control protocol or a non-wet rating will require a different solution.

Highlights

  • Commercial-grade 0-10V dimming for smooth control
  • 90W Class 2 output powers demanding LED loads
  • 24V low-voltage design suits commercial installations
  • NEMA 3R junction box rated for wet locations
  • Certified to UL 2108, UL 508A and UL 1598

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

What does the 0-10V interface cap the dimming range at?

The 0-10V dimming control provides smooth, continuous dimming across the full operating range of the 90W driver.

What physical space does the NEMA 3R junction box require for mounting?

The LO-PRO NEMA 3R junction box is a compact outdoor enclosure designed to protect the driver and wiring from weather and environmental hazards.

How is the driver combo installed, and which wiring step is most often missed?

Install the junction box in the desired wet or dry location, connect line voltage and 0-10V control wires to the driver terminals, then secure the enclosure cover to maintain the UL 1598, UL 2108 and UL 508A ratings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.