We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular junction box with integrated driver, matte grey finish, cable glands visible

Elemental LED

Elemental LED 12V 60W 277V LO-PRO Wet Loc Jct Box Driver Combo

SKU CH-DGE3-8ZPFQ

A compact 12 V, 60 W constant-voltage driver in a NEMA 3R wet-location junction box, certified to UL 2108, UL 508A and UL 1598 for outdoor use

  • typeBallasts
  • 12 V 60 W constant-voltage driver powers low-voltage LED runs
  • NEMA 3R junction box shields electronics from rain and dust
  • UL 2108 508A 1598 listings confirm safety for wet locations
  • 277 V input suits commercial three-phase panels
  • Designed in Reno Nevada by Elemental LED Inc.

Product Identity

This Elemental LED driver combo pairs a 12V 60W constant-voltage power supply with a LO-PRO NEMA 3R wet-location junction box. It is built for commercial low-voltage LED installations that need weather-resistant enclosure and Class 2 output.

Installation Notes

The unit is hard-wired and mounts in the supplied NEMA 3R box, which is UL 1598, UL 2108 and UL 508A listed for outdoor use. Common issues include forgetting to verify 120V or 277V input selection and exceeding the 60W load limit on the 12V secondary side.

Suitability

Ideal for installers running 12V LED tape, REIGN dimmers or RGB/DMX controls in damp or exterior settings where a compact, listed junction box is required. Not suited for projects needing higher wattage, a different output voltage, or a driver without an integrated weatherproof enclosure.

Highlights

  • 12 V 60 W constant-voltage driver powers low-voltage LED runs
  • NEMA 3R junction box shields electronics from rain and dust
  • UL 2108 508A 1598 listings confirm safety for wet locations
  • 277 V input suits commercial three-phase panels
  • Designed in Reno Nevada by Elemental LED Inc.

Specifications

BrandDIODE LED
typeBallasts

Questions about this item

How can I verify the 12V 60W driver is operating correctly after installation?

Measure the output with a multimeter to confirm a steady 12 volts under load and ensure the connected LED load does not exceed 60 watts.

What components are included and what must be purchased separately?

The combo includes the LO-PRO NEMA 3R junction box and the 12V 60W constant-voltage driver; you must supply 120V or 277V input wiring, low-voltage LED fixtures, and any dimmers or controllers.

Which voltage input version should I select for my supply?

This unit accepts both 120V and 277V input, so choose it when your circuit provides either of those voltages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.