We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 1 kg PLA filament spools on cardboard cores

ELEGOO PLA Filament 1.75mm Black 2×1kg Cardboard Spool

SKU CH-602P-EEA6H

Two 1 kg spools of 1.75 mm black PLA filament with ±0.02 mm accuracy, vacuum-sealed on cardboard spools for tangle-free feeding on most FDM printers

  • Color2*1kg Black
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.31 kilograms
  • Low-warp printing from high-quality PLA material
  • Smooth extrusion with ±0.02 mm diameter accuracy
  • Tangle-free spooling via mechanical winding and larger core
  • Moisture-protected filament dried and vacuum-sealed before packing
  • Works with most 1.75 mm FDM 3D printers

Two-Spool PLA Set for FDM Printing

This pack supplies two 1 kg spools of black PLA filament on cardboard reels, giving 2.31 kg total material. The 1.75 mm diameter suits most common FDM 3D printers. Low warp and odourless printing make it practical for hobbyists, educators and prototype builders who need consistent results.

Dimensional Accuracy During Long Prints

A tolerance of +/- 0.02 mm is held across each spool, keeping extrusion stable over extended jobs. Mechanical winding and manual checks reduce tangles that can halt multi-hour builds. Vacuum-sealed, dry packaging prevents moisture-related diameter drift that would otherwise degrade layer adhesion.

Low-Temperature Operation and Minimal Fumes

PLA melts cleanly between 200 and 230 °C, so the hot end runs cooler than with ABS or ASA. No heated chamber is required and the material stays odourless, keeping fan noise and power draw low. The larger spool inner diameter feeds smoothly, reducing extruder load during continuous printing.

Highlights

  • Low-warp printing from high-quality PLA material
  • Smooth extrusion with ±0.02 mm diameter accuracy
  • Tangle-free spooling via mechanical winding and larger core
  • Moisture-protected filament dried and vacuum-sealed before packing
  • Works with most 1.75 mm FDM 3D printers

Specifications

BrandELEGOO
Color2*1kg Black
MaterialPolylactic Acid
Diameter1.75
Weight2.31 kilograms

Questions about this item

How much heat does the 1.75 mm PLA filament need from the nozzle to print cleanly all day?

The recommended nozzle temperature is 200 to 230 °C for stable extrusion.

What printer hardware must I already have to use these 1 kg cardboard spools?

Any FDM 3D printer that accepts 1.75 mm filament will work with these spools.

Will the +/- 0.02 mm diameter tolerance cause jams on an older direct-drive extruder?

The tight tolerance and mechanical winding reduce tangling and snapping, helping older extruders feed smoothly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.