We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PETG filament spool, 1.75 mm diameter, 1 kg weight

ELEGOO PETG Filament 1.75mm Black 1KG +/- 0.02 mm

SKU CH-Q7C2-WMMYN

1.75 mm PETG filament on a 1 kg spool with ±0.02 mm accuracy for reliable FDM printing

  • ColorBlack
  • MaterialPolyethylene Terephthalate Glycol
  • Diameter1.75
  • Weight1 kilograms
  • Tough and durable for mechanical parts and printer components
  • Easy, smooth printing with minimal warping and strong layer adhesion
  • Consistent feeding from ±0.02 mm diameter accuracy and tangle-free winding
  • Clog-free and bubble-free after thorough drying and vacuum sealing
  • Wide compatibility with most 1.75 mm FDM 3D printers

ELEGOO PETG Filament 1.75 mm Black 1 kg

This PETG filament combines the durability of ABS with the ease of PLA for mechanical parts, holders and printer upgrades. The 1 kg spool delivers consistent 1.75 mm diameter with ±0.02 mm accuracy for reliable feeding on most FDM printers.

Installation and common issues

The filament is vacuum-sealed and pre-dried to prevent moisture-related clogging or bubbling during printing. Mechanical winding and manual inspection reduce tangles and snap events, though the material must be dried again if left exposed after opening.

Compatibility checklist

Verify that your printer accepts 1.75 mm filament and can reach a nozzle temperature between 240 °C and 270 °C. Confirm the build volume suits your intended parts and that the printer’s maximum speed setting aligns with the recommended range below 300 mm/s.

Highlights

  • Tough and durable for mechanical parts and printer components
  • Easy, smooth printing with minimal warping and strong layer adhesion
  • Consistent feeding from ±0.02 mm diameter accuracy and tangle-free winding
  • Clog-free and bubble-free after thorough drying and vacuum sealing
  • Wide compatibility with most 1.75 mm FDM 3D printers

Specifications

BrandELEGOO
ColorBlack
MaterialPolyethylene Terephthalate Glycol
Diameter1.75
Weight1 kilograms

Questions about this item

How can I confirm the filament is feeding correctly after loading it?

Watch for smooth extrusion at the recommended 240–270 °C nozzle temperature with consistent layer adhesion and no clogging or bubbling during the first layers.

What comes on the spool and do I need any extra accessories?

The box contains a 1 kg vacuum-sealed spool of 1.75 mm black PETG; no additional accessories are included, but ensure your printer accepts 1.75 mm filament.

Which spool size should I choose for a standard FDM printer?

The 1 kg (2.2 lbs) spool with ±0.02 mm diameter accuracy fits most 1.75 mm FDM printers such as Ender, Neptune, Adventurer and Kobra series.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.