We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige matte PLA filament spool on cardboard core

ELEGOO Matte PLA Filament Beige 1.75mm 1.15kg

SKU CH-D79Q-MXQQM

Matte beige PLA on a 1.15 kg spool prints at 1.75 mm with ±0.02 mm accuracy for smooth, low-gloss parts

  • ColorBeige
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1.15 kilograms
  • Matte finish hides layer lines for smooth prints
  • Diameter held to 1.75 mm ± 0.02 mm for consistent extrusion
  • Neat winding prevents tangles and feeding problems
  • Vacuum-sealed dry packaging avoids clogging and bubbles
  • Works with common 1.75 mm FDM printers

Matte PLA Filament Beige

ELEGOO Matte PLA Filament in Beige is a 1.75 mm polylactic acid spool weighing 1.15 kilograms. It is made for makers and hobbyists who want a low-gloss finish with nearly invisible layer lines on their FDM prints. The material suits decorative models, prototypes and functional parts that benefit from a muted surface.

Universal 1.75 mm FDM Compatibility

The filament fits most common 1.75 mm FDM 3D printers including Neptune 3 and Neptune 4 series without adapter changes. Each spool is neatly wound on a cardboard core to prevent tangles and feeding issues during long prints. Vacuum-sealed packaging keeps the material dry so it feeds cleanly straight from the bag.

Print Temperature 190 to 230 °C

Recommended nozzle temperature ranges from 190 to 230 °C with printing speeds below 300 mm/s for consistent extrusion. The tight diameter tolerance of ±0.02 mm reduces clogging and bubbling in normal use. For enclosed printers the manufacturer advises keeping the door open while printing this Matte PLA.

Highlights

  • Matte finish hides layer lines for smooth prints
  • Diameter held to 1.75 mm ± 0.02 mm for consistent extrusion
  • Neat winding prevents tangles and feeding problems
  • Vacuum-sealed dry packaging avoids clogging and bubbles
  • Works with common 1.75 mm FDM printers

Specifications

BrandELEGOO
ColorBeige
MaterialPolylactic Acid
Diameter1.75
Weight1.15 kilograms

Questions about this item

Will the +/- 0.02 mm diameter tolerance hold up during a full-day print without causing extrusion drift?

The filament is manufactured to a 1.75 mm diameter with a tolerance of +/- 0.02 mm and wound neatly to prevent feeding issues, so it maintains consistent extrusion throughout long prints.

Does the matte PLA need an enclosure or higher nozzle heat when running continuously?

The recommended nozzle temperature is 190 - 230 °C and the supplier advises keeping the enclosure door open when printing this matte PLA, so no extra heat or closed chamber is required.

My printer only takes 1.75 mm filament on a standard spool — will this 1.15 kg cardboard spool fit and feed correctly?

Yes, the 1.15 kg filament comes on a cardboard spool sized for common 1.75 mm FDM printers and is wound to prevent tangles, so it fits and feeds without extra hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.