We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white PLA+ filament spools, 1.75 mm diameter, vacuum-sealed on cardboard reels

ELEGOO CA-EL-3DF-PPB0459 PLA+ Filament 1.75mm White 2.24kg

SKU CH-RKKZ-A15EB

Two 1 kg spools of 1.75 mm PLA+ filament with ±0.02 mm accuracy for reliable FDM printing

  • Color2pcs White
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.24 kilograms
  • High toughness PLA+ resists impact better than standard PLA
  • Diameter held to ±0.02 mm for smooth, consistent feeding
  • Mechanical winding and manual checks prevent tangles and line breaks
  • Low warp, strong layer adhesion and 200–230 °C print range simplify setup
  • Vacuum-sealed after drying eliminates moisture-related clogging and bubbles

Enhanced toughness PLA+ filament

ELEGOO PLA+ filament delivers improved impact strength and toughness compared with standard PLA, making it suitable for functional parts and durable models. The material is polylactic acid in a 1.75 mm diameter with a dimensional accuracy of +/- 0.02 mm for consistent feeding. Two spools provide a total weight of 2.24 kilograms in white colour.

Low warp printing at moderate temperatures

The filament prints at a recommended nozzle temperature of 200 to 230 °C, which reduces warping and shrinkage during normal use. Strong layer adhesion and a glossy surface finish contribute to reliable results without requiring an enclosed printer. The spools are fully dried and vacuum sealed to prevent moisture-related clogging or bubbling.

Neatly wound spools reduce tangles

Each 1 kg spool is mechanically wound and manually inspected to minimise tangles, snaps and line breakage during printing. Universal compatibility covers most common 1.75 mm FDM printers including Neptune, Ender and Kobra series. The packaging protects the filament until it is loaded, supporting a smoother workflow for beginners and experienced users alike.

Highlights

  • High toughness PLA+ resists impact better than standard PLA
  • Diameter held to ±0.02 mm for smooth, consistent feeding
  • Mechanical winding and manual checks prevent tangles and line breaks
  • Low warp, strong layer adhesion and 200–230 °C print range simplify setup
  • Vacuum-sealed after drying eliminates moisture-related clogging and bubbles

Specifications

BrandELEGOO
ModelCA-EL-3DF-PPB0459
Color2pcs White
MaterialPolylactic Acid
Diameter1.75
Weight2.24 kilograms

Questions about this item

How do I load the 1.75 mm spools into my FDM printer and what step is often missed?

Mount each 1 kg spool on the holder, feed the filament through the guide tube, and preheat the nozzle to 200‑230 °C before inserting; the step often missed is allowing the nozzle to reach the full temperature range so the first layer adheres without clogging.

What maintenance will the filament need after opening the vacuum seal?

Store the spools in a dry box or resealable bag with desiccant; if the material absorbs moisture, dry it at a low temperature before printing again to prevent bubbles and clogging.

What limit appears first during a long print at the upper end of the temperature range?

Printing near 230 °C can increase stringing and oozing on extended runs, so the practical limit is the nozzle temperature ceiling before surface quality degrades.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.