We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PLA+ filament spool 1.75 mm diameter neatly wound on 1 kg reel

ELEGOO CA-EL-3DF-PPB0418 PLA+ Filament 1.75mm White 1kg

SKU CH-JPNC-P5FZ2

1.75 mm white PLA+ filament on a 1 kg spool with ±0.02 mm diameter accuracy for reliable FDM printing

  • ColorWhite
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1.12 kilograms
  • Tougher prints with enhanced impact strength over standard PLA
  • Consistent feeding from ±0.02 mm diameter accuracy
  • Fewer jams thanks to tangle-free mechanical winding
  • Reliable results with low warp and strong layer adhesion
  • Ready for most 1.75 mm FDM printers out of the box

PLA+ Filament 1.75 mm White 1 kg

ELEGOO PLA+ Filament 1.75 mm White 1 kg is a polylactic acid spool manufactured to a dimensional accuracy of +/- 0.02 mm for consistent feeding. The material is dried before packaging and vacuum sealed to prevent moisture absorption. It suits makers who need stronger parts than standard PLA can provide.

Printing temperature and mechanical behaviour

The recommended nozzle temperature range is 200 to 230 °C, which is lower than many engineering filaments and simplifies printer setup. Strong layer adhesion combined with low warp and shrinkage helps prints stay dimensionally stable during cooling. The formulation delivers increased impact strength and toughness for functional prototypes and end-use parts.

Spool handling and printer compatibility

Each 1.12 kilogram spool is mechanically wound and manually inspected to minimise tangles, snaps and line breakage during long prints. Universal 1.75 mm diameter fits most common FDM 3D printers including Neptune, Ender and Kobra series machines. Buyers who require filament diameters other than 1.75 mm or spool weights above 1 kg will need a different product.

Highlights

  • Tougher prints with enhanced impact strength over standard PLA
  • Consistent feeding from ±0.02 mm diameter accuracy
  • Fewer jams thanks to tangle-free mechanical winding
  • Reliable results with low warp and strong layer adhesion
  • Ready for most 1.75 mm FDM printers out of the box

Specifications

BrandELEGOO
ModelCA-EL-3DF-PPB0418
ColorWhite
MaterialPolylactic Acid
Diameter1.75
Weight1.12 kilograms

Questions about this item

How do I load the 1.75mm PLA+ filament without causing the first-layer adhesion issues beginners often hit?

Heat the nozzle to 200–230 °C, push filament until clean white extrudes, then level the bed at that temperature so the first layer squishes evenly — cold levelling is the common mistake

When will the vacuum-sealed spool need re-drying if I leave it on the printer between prints?

Reseal with desiccant after each session; if the spool sits exposed for more than a few days in humid air, dry at 50 °C for 4–6 hours before the next print to avoid bubbles

What dimensional-accuracy limit appears first during a long, fast print at 600 mm/s?

The ±0.02 mm diameter tolerance can cause slight under-extrusion at maximum speed, showing as gaps on thin walls before any thermal limit is reached

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.