We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75 mm PLA+ filament spool, 1 kg, matte finish

ELEGOO CA-EL-3DF-PPB0417 PLA+ Filament 1.75mm Black 1kg

SKU CH-1QDE-TE99H

PLA+ filament with ±0.02 mm diameter accuracy, vacuum-sealed to prevent moisture, and compatible with most 1.75 mm FDM printers

  • ColorBlack
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1.12 kilograms
  • High toughness and impact strength for durable prints
  • Dimensional accuracy ±0.02 mm ensures consistent feeding
  • Neat mechanical winding reduces tangles and line breakage
  • Vacuum-sealed after drying prevents moisture-related clogging
  • Works with most common 1.75 mm FDM 3D printers

PLA+ Filament 1.75 mm Black 1 kg

ELEGOO PLA+ Filament is a 1.75 mm polylactic acid spool weighing 1.12 kg and wound to a dimensional accuracy of ±0.02 mm. The material delivers enhanced toughness and impact strength over standard PLA for more durable prints. It is vacuum-sealed after drying to prevent moisture-related clogging or bubbling. Universal 1.75 mm FDM compatibility suits printers such as Neptune, Ender and Kobra series.

Upgrade from standard PLA

Switch to this PLA+ when functional parts need higher impact resistance and stronger layer adhesion without moving to ABS or ASA. The tighter diameter tolerance reduces feeder snags and improves surface finish on mechanical prints. Lower warp and shrinkage make large, flat models more reliable at 200–230 °C nozzle temperatures. The jump is worth it when print failures or brittle parts slow down iteration cycles.

Check printer specs before ordering

Verify that your FDM printer accepts 1.75 mm filament and can reach a nozzle temperature of at least 200 °C. Confirm the spool dimensions fit your holder or external mount, as the 1.12 kg spool may exceed compact internal bays. Ensure the build plate adhesion method works with low-warp PLA+ at the recommended 200–230 °C range. No heated enclosure is required, but a heated bed improves first-layer consistency.

Highlights

  • High toughness and impact strength for durable prints
  • Dimensional accuracy ±0.02 mm ensures consistent feeding
  • Neat mechanical winding reduces tangles and line breakage
  • Vacuum-sealed after drying prevents moisture-related clogging
  • Works with most common 1.75 mm FDM 3D printers

Specifications

BrandELEGOO
ModelCA-EL-3DF-PPB0417
ColorBlack
MaterialPolylactic Acid
Diameter1.75
Weight1.12 kilograms

Questions about this item

Does the 1.75 mm diameter with ±0.02 mm tolerance fit my printer’s extruder and Bowden tube?

The filament is manufactured to 1.75 mm ±0.02 mm, matching the spec used by most common FDM printers.

What nozzle temperature should I set for the first print, and what step do users often skip?

Heat the nozzle to 200–230 °C and dry the spool before printing; many forget the drying step even though it arrives vacuum-sealed.

When will I need to replace or maintain the spool itself?

The 1 kg spool is consumed as you print; once empty you simply load a new spool — no other maintenance is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.