We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver digital caliper 150mm LCD display 350g

Electronic Digital Calipers 150mm LCD Silver 350g

SKU CH-ZWZ2-99V38

Measures inner, outer, depth and step dimensions to 150 mm with 0.1 mm resolution on an LCD display

  • Includesno
  • Measures inner, outer, depth and step dimensions
  • Plastic jaws prevent shorts when measuring batteries
  • Reads 0–150 mm or 0–6 in with 0.1 mm resolution
  • LCD shows values instantly and powers off after 5 min
  • Zero button resets at any point for differential checks

Digital caliper for home and hobby use

This 150 mm electronic caliper reads in millimetres and inches on an LCD screen. It measures outside diameters, inside diameters, depths and steps with a resolution of 0.1 mm or 0.01 inch. The plastic jaws prevent electrical shorts when measuring batteries or circuit contacts. Accuracy is rated at ±0.2 mm, making it suitable for DIY and jewellery work rather than professional metrology.

Battery operation and auto-off

A pre-installed LR44 1.5 V cell powers the tool and a spare is included. The display activates when the slider moves and shuts down automatically after five minutes of inactivity. Current draw is negligible during use and zero in standby, so the single coin cell lasts through extended intermittent sessions. No external power supply or cable is required.

Fits a toolbox or bench drawer

At 350 g the caliper adds minimal weight to a portable kit. The zero button lets you reset the origin at any slider position for differential readings without a reference block. Unit conversion is handled by a single top-mounted button. The only consumable is the LR44/AG13 battery; no calibration fixtures, software or special fixtures are needed.

Highlights

  • Measures inner, outer, depth and step dimensions
  • Plastic jaws prevent shorts when measuring batteries
  • Reads 0–150 mm or 0–6 in with 0.1 mm resolution
  • LCD shows values instantly and powers off after 5 min
  • Zero button resets at any point for differential checks

Specifications

Includesno

Questions about this item

How do I install the battery in these 150 mm calipers, and what step do people miss?

Open the battery cover, insert the included LR44/AG13 1.5 V cell with the positive side facing up, then close the cover; the step often missed is removing the plastic insulator tab before first use.

What maintenance or replacement will these calipers need later?

Replace the LR44/AG13 1.5 V battery when the LCD dims or readings drift; clean the plastic jaws and depth probe with a dry cloth to avoid scratching delicate items.

What limit appears first during sustained use of these 150 mm calipers?

The ±0.2 mm accuracy spec is the limiting factor; the tool is designed for household and jewellery work, not for high-precision professional tasks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.