We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Electro-Voice RE27N/D dynamic microphone with Triton Audio Fethead preamp and XLR cable

Electro-Voice

Electro-Voice RE27N/D Microphone Bundle with Triton Audio Fethead and XLR Cable

SKU CH-11XS-B5MRE

A dynamic cardioid microphone with variable-D design to minimise proximity effect, bundled with an in-line preamp and XLR cable

  • Dynamic cardioid pattern rejects off-axis sound for clean broadcast capture
  • Neodymium magnet delivers up to 6dB higher output with low noise floor
  • Variable-D design virtually eliminates proximity effect for consistent low-frequency response
  • Internal blast filter covers every opening to stop pops and sibilance at close range
  • Hum-bucking coil attenuates hum from lighting and ground issues

Professional broadcast microphone bundle

The Electro-Voice RE27N/D is a dynamic cardioid microphone built for broadcast, recording and sound reinforcement. It uses a neodymium magnet for higher output and lower noise. A hum-bucking coil reduces interference from lighting and ground issues. The bundle adds a Triton Audio Fethead in-line preamp and an XLR cable.

Suited for voice work needing consistent low-end

Variable-D design keeps bass response even at any speaking distance so close-mic technique does not boom. Internal blast filter stops plosives when lips touch the grille. Three switchable filters shape tone before the signal leaves the mic. Buyers who want a condenser’s airy top-end or need phantom power only should look elsewhere.

Handles loud sources with clean headroom

Neodymium structure delivers up to 6 dB more output than the RE20 while keeping the noise floor low. High SPL capability captures kick drums, brass or stacked amps without distortion. The single microphone covers one source; sessions needing multiple simultaneous channels will require additional mics.

Highlights

  • Dynamic cardioid pattern rejects off-axis sound for clean broadcast capture
  • Neodymium magnet delivers up to 6dB higher output with low noise floor
  • Variable-D design virtually eliminates proximity effect for consistent low-frequency response
  • Internal blast filter covers every opening to stop pops and sibilance at close range
  • Hum-bucking coil attenuates hum from lighting and ground issues

Specifications

No published specifications for this item yet.

Questions about this item

Do I need a separate preamp to use the RE27N/D with my audio interface?

The bundle includes a Triton Audio Fethead in-line preamp, so you can connect the RE27N/D directly to your interface without an additional external preamp.

Will the RE27N/D match the output level of my older RE20 when connected through the Fethead?

The RE27N/D uses a neodymium magnet for up to 6 dB higher output than the RE20, and the Fethead adds clean gain, so levels will be stronger than an RE20 alone.

How can I verify the variable-D design is controlling proximity effect after I set it up?

Move closer and farther while speaking; the bass response should stay even without the low-frequency boost typical of other cardioid microphones.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.