We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Electro-Voice ND66 small-diaphragm condenser microphone black polyurethane finish 0.83 inch diameter

Electro-Voice

Electro-Voice ND66 condenser microphone 0.83" 50-20000 Hz

SKU CH-FAFY-66RRK

A small-diaphragm condenser microphone with a locking pivoting head, selectable pads and high-pass filters for detailed instrument recording

  • Captures detailed transients with premium small-diaphragm condenser element
  • Locking pivoting head enables precise placement in any situation
  • Selectable -10 and -20 dB pads prevent overload on loud sources
  • 75 Hz and 150 Hz high-pass filters remove unwanted low frequencies
  • Wide 50-20000 Hz response reproduces full instrument range

Small-diaphragm condenser for instruments

The Electro-Voice ND66 is a cardioid condenser microphone built for drums, acoustic guitar and piano. Its 0.83 inch diaphragm captures transient detail with a frequency response of 50 to 20000 Hz. A die-cast zinc body and black polyurethane finish handle stage and studio use.

Locking pivoting head replaces fixed-position mics

The pivoting head locks with a button press, letting you set the angle without stands that drift. Selectable pads at 10 and 20 dB prevent overload on loud sources. High-pass filters at 75 and 150 Hz remove low-frequency rumble that fixed-pattern mics cannot address.

XLR connection fits standard preamps and interfaces

The 3-pin XLR connector plugs directly into any mixer or audio interface supplying phantom power. Compact 21 mm diameter allows tight spacing on drum kits or piano frames. The cardioid pattern rejects off-axis bleed, freeing headroom for closer placement.

Highlights

  • Captures detailed transients with premium small-diaphragm condenser element
  • Locking pivoting head enables precise placement in any situation
  • Selectable -10 and -20 dB pads prevent overload on loud sources
  • 75 Hz and 150 Hz high-pass filters remove unwanted low frequencies
  • Wide 50-20000 Hz response reproduces full instrument range

Specifications

BrandElectro-Voice

Questions about this item

Will the 0.83" diameter fit standard microphone clips?

The 0.83" (21 mm) diameter matches common small-diaphragm condenser sizing, so it fits most standard microphone clips and shock mounts designed for pencil-style microphones.

How do you lock the pivoting head in place?

Press the button, pivot the head to the desired angle, then release the button to lock it; the mechanism holds position without drifting during a session.

Do the -10 dB and -20 dB pads need batteries?

No, the pads are passive switches on the microphone body and operate without phantom power or batteries; just select the pad that matches the source level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.