We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall black walnut floorstanding speaker with magnetic fabric grille

Elac

Elac DFR52-BK Debut Reference Floorstanding Speaker Black Walnut 140W 42Hz-35kHz 87dB 6 Ohms

SKU CH-6SEQ-CGG7G

A three-way bass-reflex floorstanding speaker with dual 5.25-inch aramid-fibre woofers and a 1-inch soft-dome tweeter covering 42 Hz to 35 kHz at 87 dB sensitivity

  • TypeFloorstanding Speakers
  • CabinetCARB2 Rated MDF
  • Connectors5-Way Metal Binding Posts
  • Driver Units5.25"
  • Power Rating140W
  • Frequency Response42Hz-35kHz
  • Smoother, detailed treble from the 1-inch soft-dome tweeter with waveguide
  • Impressive bass clarity via cast-chassis dual 5.25" aramid-fiber woofers
  • Reduced cabinet colouration thanks to full-perimeter enhanced internal bracing
  • Lower port noise and higher bass output through dual flared slot ports
  • Sophisticated high-class style with painted front baffle and walnut sides

Product Identity

The Elac DFR52-BK is a floorstanding loudspeaker from the Debut Reference series, finished in black walnut. It uses a three-way bass-reflex design with a one-inch soft-dome tweeter, a 5.25-inch aramid-fibre midrange driver and dual 5.25-inch aramid-fibre woofers in a CARB2-rated MDF cabinet.

Critical Specification

Nominal impedance is six ohms and sensitivity is rated at 87 dB, so the amplifier must be stable into a six-ohm load and provide enough current for the 140-watt power rating. Buyers whose electronics are specified only for eight-ohm loads should verify compatibility before purchasing.

Thermals Noise Power

Passive operation means the speaker generates no fan noise and draws no power from the mains. Heat is limited to the voice coils during high-level playback, and the dual flared slot ports are designed to reduce port turbulence at the 42 Hz low-frequency extension.

Highlights

  • Smoother, detailed treble from the 1-inch soft-dome tweeter with waveguide
  • Impressive bass clarity via cast-chassis dual 5.25" aramid-fiber woofers
  • Reduced cabinet colouration thanks to full-perimeter enhanced internal bracing
  • Lower port noise and higher bass output through dual flared slot ports
  • Sophisticated high-class style with painted front baffle and walnut sides

Specifications

BrandELAC
SeriesDebut Reference
ModelDFR52-BK
TypeFloorstanding Speakers
CabinetCARB2 Rated MDF
Connectors5-Way Metal Binding Posts
Driver Units5.25"
Power Rating140W
Frequency Response42Hz-35kHz
Nominal Impedance6 Ohms
Sensitivity87 dB
FeaturesEnhanced Bracing, 3-Way Bass Reflex
Dimensions & Weight36.81
Package ContentsMagnetic Fabric Grille

Questions about this item

What does the 87 dB sensitivity mean for real-world volume?

At 87 dB sensitivity, the DFR52-BK produces a moderate output level from one watt at one metre; you will need an amplifier that can cleanly deliver up to the 140 W power rating into 6 ohms to reach high volumes without distortion.

How do the 5-way binding posts limit the cables I can use?

The 5-way metal binding posts accept bare wire, spade lugs, pin connectors and 4 mm banana plugs, so any standard speaker cable termination will work; they impose no electronic bandwidth limit on the 42 Hz–35 kHz frequency response.

Will the 39.99-inch height and 7.28-inch width fit my room layout?

Each speaker stands 39.99 inches tall, 7.28 inches wide and 9.52 inches deep, so measure floor clearance and distance from walls; the magnetic fabric grille adds minimal depth and removes easily for driver access.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.