Elac
Elac DB53-BK bookshelf speakers with LS10-B stands
A pair of 5.25" bookshelf speakers on 23" steel-and-wood stands, delivering 48–38 kHz response at 86.5 dB sensitivity
- TypeIndoor/Outdoor Speakers
- Optimised listening height with 23-inch steel and wood stands
- Stable placement on any floor using adjustable spikes and rubber feet
- Clear highs from 1-inch aluminium tweeter and aramid-fibre woofers
- Extended frequency range from 48 Hz to 38 kHz for detailed playback
- Flexible amplifier matching with 20 to 120 W recommended power
Elac DB53-BK bookshelf speakers
This bundle pairs Elac DB53-BK bookshelf speakers with LS10-B stands for a complete stereo setup. The 2-way bass reflex design uses a 1-inch aluminum tweeter and 5.25-inch aramid fiber woofers. A black ash finish with satin black baffle suits home listening rooms. Recommended amplifier power is 20-120W for proper drive.
LS10-B stands at 23 inches
Steel top plates and aluminum columns sit on MDF bases weighing 5.5 lbs each. Adjustable spikes and rubber feet adapt to carpet or hard floors. The stands position tweeters at seated ear height for accurate imaging. They are built to complement the Debut 2.0 and Uni-Fi 2.0 speaker lines.
16mm MDF cabinet with dual flared ports
Cabinet construction reduces resonance during extended playback. Frequency response spans 48 to 38kHz at 86.5 dB sensitivity into a nominal 6 ohm load. Dual 5-way metal binding posts accept banana plugs or bare wire. Peak power handling supports dynamic passages without compression.
Highlights
- Optimised listening height with 23-inch steel and wood stands
- Stable placement on any floor using adjustable spikes and rubber feet
- Clear highs from 1-inch aluminium tweeter and aramid-fibre woofers
- Extended frequency range from 48 Hz to 38 kHz for detailed playback
- Flexible amplifier matching with 20 to 120 W recommended power
Specifications
| Type | Indoor/Outdoor Speakers |
|---|
Questions about this item
Do the DB53-BK speakers run hot or draw much power when played all day?
The speakers are passive, so they produce no heat and draw no power themselves; only the connected amplifier consumes electricity.
What amplifier do I need to drive the 6-ohm, 86.5 dB DB53-BK speakers?
An amplifier rated between 20 and 120 watts per channel into 6 ohms will match the recommended power range.
Can I use the LS10-B stands with my older Debut 2.0 bookshelf speakers?
Yes, the LS10-B stands are designed to complement both the Debut 2.0 and Uni-Fi 2.0 speaker lines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



