Eightwood EWAN0113 Tri-Band WiFi 7 Antenna RP-SMA Magnetic Base 6.5ft Cable
Tri-band 2.4 GHz, 5 GHz and 6 GHz antenna with 6.5 ft cable and magnetic base upgrades WiFi 7 and WiFi 6E devices using RP-SMA connectors
- TypeRadio
- ColorBlack
- SpecificationsRadio
- FeaturesRadio
- Tri-band 2.4 GHz, 5 GHz and 6 GHz coverage lets WiFi 7 and WiFi 6E devices use all available spectrum
- 6 dBi omnidirectional gain strengthens reception for faster speeds and lower latency on compatible hardware
- Dual RP-SMA male connectors fit standard threaded ports on routers, PCIe cards and motherboards
- 5 ft RG174 low-loss cable and magnetic base allow flexible placement on any metal surface
- Not compatible with ASUS or MSI boards that use quick-connect push-on antenna interfaces
Tri-Band WiFi 7 RP-SMA Antenna
The Eightwood EWAN0113 is a tri-band antenna covering 2.4 GHz, 5 GHz and 6 GHz frequencies for WiFi 7, WiFi 6E and WiFi 6 devices. It connects via dual RP-SMA male plugs and includes a 6.5 ft RG174 coaxial cable with a magnetic base for flexible placement on metal surfaces. The omnidirectional design offers 6 dBi gain with linear vertical polarisation.
Suits threaded RP-SMA ports only
This antenna fits motherboards, PCIe cards, routers and modems that expose threaded RP-SMA connectors. It will not work with ASUS or MSI boards that use a quick-connect push-on interface, nor with any device lacking external antenna ports. Buyers who need an internal antenna or a different connector type should look elsewhere.
Adds 6.5 ft of low-loss reach
The supplied cable lets you position the 20.8 cm tall antenna away from the chassis for clearer line-of-sight to the access point. The magnetic base secures it to steel case tops, filing cabinets or shelves without drilling. No extra adapters or power are required; the antenna simply replaces the existing whip antennas on compatible RP-SMA equipment.
Highlights
- Tri-band 2.4 GHz, 5 GHz and 6 GHz coverage lets WiFi 7 and WiFi 6E devices use all available spectrum
- 6 dBi omnidirectional gain strengthens reception for faster speeds and lower latency on compatible hardware
- Dual RP-SMA male connectors fit standard threaded ports on routers, PCIe cards and motherboards
- 5 ft RG174 low-loss cable and magnetic base allow flexible placement on any metal surface
- Not compatible with ASUS or MSI boards that use quick-connect push-on antenna interfaces
Specifications
| Brand | Eightwood |
|---|---|
| Model | EWAN0113 |
| Part Number | EWAN0113 |
| Type | Radio |
| Color | Black |
| Specifications | Radio |
| Features | Radio |
Questions about this item
What RP-SMA WiFi card or router must I already have to attach this antenna?
Any device with a threaded RP-SMA female port — motherboards, PCIe cards, routers or modems — that accepts a dual RP-SMA male connector with no center pin.
Will this antenna work if I keep my WiFi 6 router while upgrading only the antenna?
Yes. It supports 802.11 b/g/n/ac/ax/be, so it operates on WiFi 6, WiFi 6E and WiFi 7 hardware across the 2.4 GHz, 5 GHz and 6 GHz bands.
How can I confirm the antenna is performing as intended after I mount it?
Check that the magnetic base holds firmly on a metal surface, the 6.5 ft RG174 cable reaches the optimal spot, and your device shows stronger RSSI, higher throughput and lower latency on all three bands.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
