Eeyrnduy LP-E10 2-Pack 1600 mAh camera battery
Two 1600 mAh lithium-ion packs power compatible Canon EOS Rebel and Kiss models with real-time charge display and multi-circuit protection
- Typelithium_ion
- Chemicallithium_ion
- Capacity1600 milliamp_hours
- CompatibilityCamera
- Two-pack keeps a spare ready for extended shooting
- 1600 mAh capacity powers long sessions without frequent swaps
- Decoded chip shows real-time charge level on compatible Canon bodies
- Multi-circuit protection guards against short-circuit, over-voltage, over-discharge and over-current
- Compatible with EOS Rebel T3, T5, T6, T7, Kiss X50, X70 and EOS 1100D, 1200D, 1300D, 2000D
Compatible Canon models
The two-pack supplies LP-E10 lithium-ion cells for Canon EOS Rebel T3, T5, T6, T7, Kiss X50, X70 and EOS 1100D, 1200D, 1300D, 1500D, 2000D, 3000D and 4000D bodies. It does not fit T3i, T5i, T6i or T7i models.
Capacity and daily headroom
Each cell delivers 1600 mAh, enough for extended shooting sessions and fast continuous photographing. The pair covers a full day of typical use, while very long video recording or cold-weather work will eventually require a recharge.
Build quality and everyday handling
Multi-circuit protection guards against short-circuit, over-voltage, over-discharge and over-current events. The decoded design allows the camera to display real-time battery level, and the cells accept charging from the original Canon charger.
Highlights
- Two-pack keeps a spare ready for extended shooting
- 1600 mAh capacity powers long sessions without frequent swaps
- Decoded chip shows real-time charge level on compatible Canon bodies
- Multi-circuit protection guards against short-circuit, over-voltage, over-discharge and over-current
- Compatible with EOS Rebel T3, T5, T6, T7, Kiss X50, X70 and EOS 1100D, 1200D, 1300D, 2000D
Specifications
| Brand | Eeyrnduy |
|---|---|
| Model | two battery pack |
| Type | lithium_ion |
| Chemical | lithium_ion |
| Capacity | 1600 milliamp_hours |
| Compatibility | Camera |
Questions about this item
Will these 1600 mAh LP-E10 batteries power my older EOS 1100D the same way as the original pack?
They are built to the LP-E10 form factor and 1600 mAh rating, so the EOS 1100D recognises the cells and reports remaining charge exactly as it does with the factory battery.
How can I confirm the decoded chip is communicating properly after I insert a fresh cell?
Turn the camera on; the battery-info screen should show a percentage read-out rather than a flashing question mark, proving the decoder is talking to the body.
Does the two-pack include a charger or do I need to buy one separately?
Only the two 1600 mAh LP-E10 batteries are in the box; a compatible charger must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ENERGIZER NH12BP-4 AAA Ni-MH 850mAh 1.2V 4-pack standard battery
- Batteries
- 4-pack
Sunbeam BC-0903 charger with 8 AA 2900 mAh NiMH batteries
- Rechargeable Batter…



