Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00947486BTC
In stock
Eemax
Eemax SPEX100T EE Electric Tankless Water Heater 277VAC Single Phase
Electric tankless water heater delivering 70–90 °F at up to 3 gpm from a 277 V single-phase supply
- TypeWater Heaters
- Instant hot water for eyewash safety at 0.2 gpm activation
- Delivers 3 gpm flow at 277 V single-phase power
- Compact 10.75 × 5.25 × 3 in fits tight commercial spaces
- 10 kW output provides 70–90 °F outlet temperature range
- 36 A draw with 3/8 in cold inlet for direct plumbing
Point-of-use eyewash heater
The Eemax SPEX100T EE is an electric tankless water heater configured for eyewash stations. It runs on 277 V AC single-phase power and draws 36 A at 10,000 W. The unit activates at a minimum flow of 0.2 gpm and delivers up to 3 gpm. Water temperature is adjustable between 70 and 90 degrees F for safe, tepid output.
Indoor commercial facilities only
This model suits indoor commercial sites that have 277 V single-phase service and need a compact eyewash heater. The 10.75 in height, 5.25 in width and 3 in depth fit tight mechanical spaces. Facilities without 277 V supply, or installers needing higher flow rates for multiple fixtures, should consider other solutions.
277 V single-phase power requirement
The heater operates exclusively on 277 V AC single-phase current at 36 A. A compatible electrical service and dedicated circuit are mandatory for installation. Without this exact voltage and phase configuration the unit will not function.
Highlights
- Instant hot water for eyewash safety at 0.2 gpm activation
- Delivers 3 gpm flow at 277 V single-phase power
- Compact 10.75 × 5.25 × 3 in fits tight commercial spaces
- 10 kW output provides 70–90 °F outlet temperature range
- 36 A draw with 3/8 in cold inlet for direct plumbing
Specifications
| Brand | EEMAX |
|---|---|
| Type | Water Heaters |
Questions about this item
What cold-water inlet size does the SPEX100T require?
The unit uses a 3/8 in cold inlet, so plan piping or adapters to match that connection.
What electrical supply is needed and what wiring mistake should be avoided?
It needs a 277 V AC single-phase circuit rated for 36 A; the common error is using a lower-voltage or undersized breaker.
How often should the inlet filter be checked on this model?
Inspect and clean the inlet screen at least once a year, or more often in hard-water areas, to maintain the 0.2 gpm activation threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
