We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular die-cast metal electromagnetic door holder with powder epoxy aluminum finish, flush mount design

EDWARDS-SIGNALING

EDWARDS-SIGNALING 1509-AQN5 Electromagnetic Door Holder 120VAC Flush Mount

SKU CH-5K5F-ZH28V

Electromagnetic door holder mounts flush, runs on 120 VAC, and provides 25 to 50 lb holding force for fire-panel integration

  • TypeDoor Hardware & Components
  • Holds doors open reliably with 25 to 50 lb holding force
  • Compatible with fire panels for life-safety integration
  • UL Listed and FM Approved for code compliance
  • Operates on 120VAC or 24VAC/DC for flexible wiring
  • Flush-mount design projects only 13/16 inch from wall

Product Identity

The EDWARDS-SIGNALING 1509-AQN5 is an electromagnetic door holder designed for flush mounting on walls. It operates on 24VAC/DC or 120VAC input and provides adjustable holding force between 25 and 50 pounds. The unit carries UL Listed and FM Approved ratings for use with fire panels.

Suitability

This holder suits commercial and institutional installations that require fail-safe door release tied to a fire alarm system. The flush-mount design fits standard wall constructions where a low-profile projection of 13/16 inch is needed. Facilities needing surface-mount hardware or higher holding forces should consider other configurations.

Decisive Specification

The dual-voltage input of 24VAC/DC and 120VAC determines whether this holder matches the building's electrical supply and fire-panel output. Verifying the available voltage at the mounting location is the single check that confirms compatibility before purchase.

Highlights

  • Holds doors open reliably with 25 to 50 lb holding force
  • Compatible with fire panels for life-safety integration
  • UL Listed and FM Approved for code compliance
  • Operates on 120VAC or 24VAC/DC for flexible wiring
  • Flush-mount design projects only 13/16 inch from wall

Specifications

BrandEDWARDS SIGNALING
TypeDoor Hardware & Components

Questions about this item

What voltage does the 1509-AQN5 require and what holding force does it deliver?

The unit operates on 120VAC and provides a holding force of 25 to 50 pounds.

What are the body dimensions and projection for flush-mount planning?

The lock body measures 4-5/8 inches long, 2-3/4 inches wide and 13/16 inches deep, with a total projection of 2-5/8 inches from the wall.

How is the 1509-AQN5 wired to a fire panel and what common step is missed?

Connect the coil to the fire panel's release circuit at 120VAC; the step often missed is verifying the panel cuts power on alarm so the magnet releases the door.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.