We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black rectangular bookshelf speakers with front headphone jack and volume knob

Edifier MR3 2.0 Powered Studio Monitors 42W Black Pair

SKU CH-FX1N-RA770

Powered studio monitors with Hi-Res Audio certification, 42 W total output, Bluetooth 2.0 and balanced TRS, RCA, AUX inputs plus headphone output

  • TypeMonitor
  • ColorBlack
  • Configuration2.0
  • Total Power42 watts
  • Satellite RMS Power /ea42 watts
  • Driverdynamic_driver
  • Hi-Res Audio certified for accurate 52Hz–40kHz monitoring
  • 42 W total power with 3.5″ drivers and 1″ tweeters
  • Balanced TRS, RCA, AUX inputs plus front headphone output
  • Switchable Music, Monitor and Custom EQ modes via app
  • MDF cabinet reduces distortion for studio and daily use

Edifier MR3 42W Studio Pair

The Edifier MR3 is a 2.0 powered monitor pair built for desktop audio production, video editing and critical listening. Each speaker delivers 18W RMS from a Class-D amplifier operating at 24-bit/96kHz for bit-perfect conversion. Hi-Res Audio certification confirms a flat response suited to mixing and mastering tasks.

18W RMS per Channel Headroom

The dual 3.5-inch mid-low drivers and 1-inch tweeters produce a peak SPL of 92.5dB with 85dB signal-to-noise ratio. Frequency response spans 52Hz to 40kHz, covering deep lows and extended highs for detailed monitoring. Bass-heavy material at very high volumes will reach the limits of the 3.5-inch woofers before the amplifier clips.

Balanced TRS RCA AUX Bluetooth 2.0

Balanced TRS, unbalanced RCA and 3.5mm AUX inputs accept simultaneous sources, while a front-panel headphone output enables private monitoring. Bluetooth 2.0 supports multi-point pairing for wireless playback. The EDIFIER ConneX app provides Music, Monitor and Custom EQ modes for room compensation.

Highlights

  • Hi-Res Audio certified for accurate 52Hz–40kHz monitoring
  • 42 W total power with 3.5″ drivers and 1″ tweeters
  • Balanced TRS, RCA, AUX inputs plus front headphone output
  • Switchable Music, Monitor and Custom EQ modes via app
  • MDF cabinet reduces distortion for studio and daily use

Specifications

BrandEdifier
Modeledifier-mr3-black-fba
Part Numberedifier-mr4-mr3
TypeMonitor
ColorBlack
Configuration2.0
Total Power42 watts
Satellite RMS Power /ea42 watts
Driverdynamic_driver
Frequency Response40 KHz
Signal to Noise Ratio(SNR)85 decibels
Remoteapplication
Dimension12.55 in x 18.5 in x 22.0 in
Weight5.06 kilograms
FeaturesMulti Room Audio
Package ContentsWarranty Card

Questions about this item

Can I connect the Edifier MR3 monitors to an older audio interface that only has unbalanced RCA outputs?

Yes, the speakers include RCA inputs alongside balanced TRS and 3.5 mm AUX, so a standard RCA cable from your interface will work without adapters.

How can I verify the MR3 monitors are reproducing the full 52 Hz to 40 kHz Hi-Res range after setup?

Play a 24-bit/96 kHz test sweep through the ConneX app in Monitor mode; the flat response certification means you should hear consistent output across the entire stated bandwidth.

What cables come in the box with the MR3 pair and which ones must I buy separately?

Only a warranty card is listed in the package contents; you will need to supply RCA, TRS, 3.5 mm AUX or speaker cables depending on which inputs you use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.