We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DIMM memory module with black chips and gold edge contacts

EDGE Tech

EDGE Tech 4 GB DDR4 2133 MHz DIMM memory card

SKU CH-83BD-DZ8YQ

Adds 4 GB of DDR4 memory at 2133 MHz in a 288-pin DIMM running at 1.20 V

  • 4 GB DDR4 capacity handles everyday workloads
  • 2133 MHz speed matches DDR4-2133/PC4-17000 standard
  • 20 V low voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design for consumer systems

Product Identity

The EDGE Tech 4 GB DDR4 2133 MHz DIMM is a single 288-pin desktop memory module built to the DDR4-2133/PC4-17000 standard. It suits system builders or upgraders adding baseline capacity to a compatible motherboard. Buyers needing ECC error correction or registered signal processing should look elsewhere.

Bundle Impact

The module ships alone without extra brackets, cables or software utilities. Installation relies solely on the motherboard DIMM slot and standard UEFI memory training. No configuration files or driver packages are supplied to alter behaviour.

Installation Notes

Align the notch with the slot key and press firmly until the retention clips engage at 1.20 V operation. The unbuffered non-ECC design works with most consumer boards but will not function in platforms that require registered or ECC memory. Verify the motherboard qualification list before purchase.

Highlights

  • 4 GB DDR4 capacity handles everyday workloads
  • 2133 MHz speed matches DDR4-2133/PC4-17000 standard
  • 20 V low voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design for consumer systems

Specifications

BrandEDGE Memory

Questions about this item

Does the 288-pin DIMM require any periodic cleaning or replacement during its lifetime?

The module is a solid-state component with no moving parts; it does not need scheduled cleaning or replacement under normal operation.

What is the first limit reached when the 2133 MHz DDR4 module runs at full load continuously?

The memory controller’s 2133 MHz data-rate ceiling is the primary throughput limit; the module itself has no thermal throttle point published.

How much heat and power does the 1.20 V unbuffered DIMM produce when installed in a workstation running all day?

At 1.20 V the module draws low power and generates minimal heat; no active cooling is required for typical desktop workloads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.