SonicWall 01-SSC-1465 Capture Advanced Threat Protection hardware license 1 Year TZ600 Series
- Capture Advance Thr…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Edge-Core Networks Corporation
A 44-port Gigabit stackable Layer 3 switch with four combination SFP slots, two 10G module bays and 16K MAC table
The Edge-Core ECS4610-50T is a stackable Layer 3 Gigabit Ethernet switch with 44 RJ-45 10/100/1000BASE-T ports and four combination RJ-45/SFP Gigabit ports. It includes two module slots for optional 10GBASE XFP transceivers. The unit supports IEEE 802.3ae 10 Gigabit Ethernet and a range of L2/L3 switching standards.
This switch suits service-provider edge aggregation, enterprise wiring closets, data-centre aggregation and network-core deployments needing resilient stacking and wire-speed L3 routing. Buyers who need Power over Ethernet for attached devices, higher port density beyond 44 copper ports, or native 10GBASE-T copper uplinks should look at other models.
The defining specification is the stackable design combined with two 10GBASE extender module slots for XFP transceivers. This allows multiple units to operate as a single logical switch while providing optional 10 Gigabit uplinks for aggregation or core connectivity.
| Brand | Edge-Core |
|---|---|
| Model | ECS4610-50T |
| Format | Stackable |
| Standards | IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet Full-duplex flow control IEEE 802.3ae 10 Gigabit Ethernet IEEE 802.3D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1Q Virtual LAN ISO/IEC 8802-3 CSMA/CD |
| Primary Ports | 44 x RJ-45 10/100/1000BASE-T 4 x Combination (RJ-45/SFP) Gigabit Ethernet |
| Primary Port Speed | 10/100/1000Mbps |
| MAC Address Table | 16K |
| VLAN Support | IP subnet based VLAN Private VLAN Isolated Private VLAN GVRP/GARP 802.1v protocol Voice VLAN VLAN translation IPv6 VLANs VLAN Trunking |
| Buffer Memory | Packet Buffer 2MB |
| Security | Port security IP Source Guard Supports IEEE 802.1X port-based and MAC-based access control IP filter configuration for management interface (SNMP, Telnet, Web) RADIUS authentication Access Control List SSH v2 HTTPS/SSL MAC filter Dynamic ARP Inspection Link detection |
| Stackable | Yes |
| SNMP | RFC 1907 SNMPv2-MIB (MIB-II) RFC 2011 IP-MIB (MIB-II) RFC 2012 TCP-MIB (MIB-II) RFC 2013 UDP-MIB (MIB-II) IEEE 802.1X IEEE8021-PAE-MIB RFC 1493 Bridge MIB RFC 2863 IF-MIB RFC 2819 RMON MIB RFC 2618 RADIUS MIB RFC 2665 Etherlike MIB RFC 2737 Entity MIB RFC 2674 P-bridge, Q-bridge V-Bridge MIB RFC 3036 MAU MIB RFC 1612 DNS Reslover MIB RFC 3411 SNMP Framework RFC 3412 SNMP MPD MIB RFC 3413 SNMP Target MIB, SNMP Notify MIB RFC 3415 SNMP View-Based ACM MIB SNMP Trap Supported: RFC 1215, 1907, 2863, 1493, 1757, 2819 Private MIB |
| QoS | Priority Queues: 8 hardware queues per port Traffic classification based on IEEE 802.1p CoS, IP Precedence, DSCP, TCP/UDP port number, Access Control List, marking DiffServ Supports WRR and strict priority Port rate limiting |
| Layer | 3 |
| Module Support | 2 x 10GBASE extender module slots for XFP transceivers |
| Power | Voltage: 100-240V AC auto-ranging Frequency: 47-63Hz Current: 0.995 A @ 110 VAC (without expansion XFP modules) 1.21 A @ 110 VAC (with two expansion XFP modules) 0.54 A @ 240 VAC (without expansion XFP modules) 0.605 A @ 240 VAC (with two expansion XFP modules) Power Consumtion 98.16 Watts (without expansion XFP modules) 104.16 Watts (with two expansion XFP modules) |
| Dimensions | 17.3"W x 16.3"D x 1.7"H |
| Weight | 13.4 lbs. |
| Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 5% - 95%, Non-condensing |
| Features | Flash Memory: 64MB Out-of-Band Management: Console Port 256MB SDRAM for CPU Forwarding Rate: 95.2Mpps Switching Capacity: 128Gbps L2 Features Spanning Tree Loopback detection Auto edge port BPDU filter/guard Jumbo Frame : 9K IGMP Snooping v1/v2/v3 Select Q-in-Q L3 Features Host table: 8K Route table: 8K Static route table: 512 Multicast table: 1K Unicast routing Static unicast routes RIP v1/v2 OSPF BGP Multicast routing PIM-DM PIM-SM IGMP v1/v2/v3 IGMP v3 proxy IP Redundancy Proxy ARP UDP Helper IPv6 Features IPv4/IPv6 Dual Protocol Stack IPv6 Address Types : Unicast, Multicast ICMPv |
| Shipping weight | 6.80 kg |
| Package size | 533 × 470 × 127 mm |
The table supports 16K entries; when full, the switch removes the least-recently-used addresses to make space for new ones.
The switch draws 1.21 A at 110 VAC with two XFP modules installed.
The slots accept XFP transceivers, which must be purchased separately.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?