Ecco
ECCO EW2010R LED Spot Light Red 300lm 12-56V IP67
Red LED safety light projects a 300 lm arrow pattern at 12–56 V DC with IP67 sealing for cranes, forklifts and skid steers
- ColorRed
- MaterialHAWA
- Bright 300 lm red arrow improves zone visibility
- Wide 12-56 V DC range suits many vehicles
- IP67 rating withstands water and dust ingress
- Aluminium housing resists impact in tough conditions
- Bolt mount with pigtail simplifies installation on equipment
ECCO EW2010R LED Spot Light
The ECCO EW2010R is a red LED safety boundary light built for industrial vehicles. It projects a clear arrow pattern from the front or rear of cranes, forklifts and skid steers. The aluminium housing carries an IP67 rating for harsh outdoor environments. Operators needing a highly visible warning signal will find it suitable.
Thermals noise and power draw
The unit operates on a wide 12-56V DC supply through a simple pigtail connection. LED technology keeps power draw low and eliminates the heat and vibration issues common with older lamps. Silent running is inherent with no moving parts or cooling fans required. The R10 certification confirms electromagnetic compatibility for vehicle electrics.
Bolt mount and arrow projection
A bolt-on round housing allows direct attachment to flat metal surfaces on compatible machinery. The lens projects a distinct red arrow beam to mark safety zones around the vehicle. Three internal LEDs deliver 300 lm maximum brightness for day and night visibility. No additional controllers or wiring harnesses are included in the package.
Highlights
- Bright 300 lm red arrow improves zone visibility
- Wide 12-56 V DC range suits many vehicles
- IP67 rating withstands water and dust ingress
- Aluminium housing resists impact in tough conditions
- Bolt mount with pigtail simplifies installation on equipment
Specifications
| Color | Red |
|---|---|
| Brand | ECCO |
| Material | HAWA |
Questions about this item
How do I mount the EW2010R using its bolt mount and connect the pigtail?
Secure the light with the bolt mount on a flat surface, then route the pigtail to a 12-56V DC supply; the common mistake is leaving the pigtail unsealed, which risks water ingress despite the IP67 rating.
What maintenance will the three LED bulbs need over time?
The three LED bulbs are solid-state and require no scheduled replacement; periodically clean the clear lens and check the bolt torque and pigtail seal to maintain the IP67 protection.
At what voltage limit does the light stop operating during extended use?
The unit operates from 12 to 56V DC; if the supply drops below 12V or rises above 56V the light will shut off, so verify your vehicle system stays within that range under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Zoro Select Probe Covers 15-617-000 PK500 Transparent
- Transparent
HealthSmart 18-220-000 Infrared Digital Thermometer Gray/White
- Gray/White
HealthSmart Foods, Inc. 04-655-001 Digital Blood Pressure Monitor Arm Adult Black
- Black



