Ecco
Ecco ED3777G Forklift Safety Light Green 17W 12-24V IP67
Green LED perimeter warning light flashes at 17 W, runs on 12-24 V DC, and meets SAE J595 Class 1 with IP67 sealing
- ColorGreen
- Green LED perimeter light improves forklift visibility
- 17 W output meets SAE J595 Class 1 brightness standard
- IP67 rating withstands water and dust ingress
- 12-24 V DC range suits most industrial vehicles
- Permanent mount with blunt-cut wires for direct wiring
Forklift Perimeter Warning Light
The Ecco ED3777G is a green LED safety light designed for forklifts and universal industrial vehicles. It projects a flashing perimeter beam to alert pedestrians and operators in busy work zones. The unit carries an SAE J595 Class 1 rating and an IP67 ingress protection rating for harsh environments.
Suits Permanent 12-24V Installations
This light fits fleets that need a hard-wired, permanent mount on material-handling equipment running on 12 or 24 volt DC systems. It is not suited for portable or temporary mounting, nor for vehicles that require a different flash pattern or colour than the fixed green output provided.
17 Watt LED Output and IP67 Sealing
The 17 watt LED array delivers a high-intensity flashing pattern visible in daylight and low-light conditions. The IP67 rating ensures the sealed housing withstands pressure washing and heavy dust exposure. The blunt-cut wire leads require basic electrical termination skills to complete the installation.
Highlights
- Green LED perimeter light improves forklift visibility
- 17 W output meets SAE J595 Class 1 brightness standard
- IP67 rating withstands water and dust ingress
- 12-24 V DC range suits most industrial vehicles
- Permanent mount with blunt-cut wires for direct wiring
Specifications
| Brand | ECCO |
|---|---|
| Color | Green |
Questions about this item
What voltage supply must my forklift provide for the ED3777G to operate?
The light runs on 12-24 V DC, so any forklift electrical system within that range will power it directly.
Will the SAE J595 Class 1 rating on this green LED interfere with older incandescent warning lights I keep on the same vehicle?
No, the ED3777G draws 17 W and flashes independently; it adds perimeter warning without affecting legacy lights on the same 12-24 V circuit.
How can I confirm the IP67 seal is intact after permanent mounting?
Apply 12-24 V DC and verify the green LED flashes a steady perimeter pattern; water ingress would disrupt the flash or kill the light entirely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



