Ecco
Ecco ED3777AB LED Warning Light Amber Blue
Dual-colour LED warning light with 14 flash patterns and permanent mounting for 12 to 24 V DC systems
- Amber and blue LED visibility for emergency signalling
- Fourteen selectable flash patterns adapt to different road situations
- Three LED heads increase light output from multiple angles
- IP67 rating protects against dust and water ingress
- Operates on 12 to 24 volt DC vehicle systems
Warning Light for Fleet Vehicles
The Ecco ED3777AB is a permanent-mount LED warning light built for fleet and commercial vehicles needing amber and blue output. It operates on 12 to 24V DC systems and connects via a pigtail wiring harness. The unit meets SAE J595 Class I, California Title 13, ECE R10, ECE R65, CE and IP67 standards for regulated use.
Fourteen Flash Patterns Across Three Heads
Three LED heads provide 14 selectable flash patterns with variable flashes per minute for scene-specific signalling. The multi-pattern capability covers steady burn, alternating and simultaneous modes required by different jurisdictions. Users who need more than 14 patterns or additional head counts must specify a different model.
Sealed Housing With Low Heat Output
The IP67-rated enclosure resists water ingress and dust without active cooling, so operation stays silent. LED technology draws minimal current from the vehicle electrical system while producing little forward heat. The compact 5 3/8 in by 3 in by 1 3/8 in housing fits tight mounting locations where larger beacons cannot.
Highlights
- Amber and blue LED visibility for emergency signalling
- Fourteen selectable flash patterns adapt to different road situations
- Three LED heads increase light output from multiple angles
- IP67 rating protects against dust and water ingress
- Operates on 12 to 24 volt DC vehicle systems
Specifications
| Brand | ECCO |
|---|
Questions about this item
Will the 12 to 24V DC input work with my existing 12V vehicle electrical system?
Yes, the unit operates on 12 to 24V DC, so it is compatible with standard 12V vehicle systems and 24V heavy-duty setups without modification.
How can I verify the light meets the SAE J595 Class I and IP67 ratings after installation?
Check that all three LED heads illuminate through the 14 selectable flash patterns and confirm no water ingress appears on the lens after exposure to rain or washing.
Does the package include a mounting bracket and switch, or must I buy them separately?
The light comes with a permanent-mount base and a pigtail wiring lead; a separate switch or controller is required to activate and change the 14 flash patterns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
