We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber LED warning light, rectangular housing, clear lens, permanent mount, pigtail wiring

Ecco

ECCO ED0004A Amber LED Warning Light

SKU CH-T7ZX-7M3BF

Amber LED warning light with 14 flash patterns, six heads and 12-24 V DC permanent mounting

  • ColorAmber
  • Amber LED output meets SAE J595 Class I visibility standards
  • Fourteen selectable flash patterns suit diverse traffic scenarios
  • Six LED heads deliver wide-angle warning coverage
  • Permanent mount with pigtail wiring ensures secure installation
  • Operates on 12 to 24V DC for fleet versatility

ECCO ED0004A Amber LED Warning Light

The ECCO ED0004A is a permanent-mount amber warning light designed for vehicle safety applications. It operates on 12 to 24V DC power and uses LED technology with six heads to produce high-visibility signals. The unit meets SAE J595 Class I, California Title 13, R10 and R65 standards for professional use.

Sustained load performance

Fourteen selectable flash patterns allow operators to choose the cadence that best suits traffic conditions. The LED light heads maintain consistent output during extended operation without the heat buildup associated with older lamp types. Quad flash capability delivers rapid bursts for maximum attention in hazardous zones.

Installation and common issues

Permanent mounting requires a secure surface and correct wiring of the pigtail connection to the vehicle electrical system. Verifying that the supply voltage stays within the 12 to 24V DC range prevents premature failure. Improper grounding or exposure to voltages outside the specified range are the most frequent causes of malfunction.

Highlights

  • Amber LED output meets SAE J595 Class I visibility standards
  • Fourteen selectable flash patterns suit diverse traffic scenarios
  • Six LED heads deliver wide-angle warning coverage
  • Permanent mount with pigtail wiring ensures secure installation
  • Operates on 12 to 24V DC for fleet versatility

Specifications

ColorAmber
BrandECCO

Questions about this item

How much current does the ED0004A draw when running continuously on a 12 V system?

It operates on 12 to 24 V DC and uses LED technology, which typically draws low current compared to halogen beacons, so all-day operation will not strain a healthy vehicle electrical system.

Does the pigtail wiring on the ED0004A require a separate switch or controller to select the 14 flash patterns?

The light includes 14 selectable flash patterns and a permanent-mount pigtail; pattern selection is usually made via a momentary wire in the pigtail, so no external controller is needed.

Will the SAE J595 Class I and R65 rated ED0004A interfere with older halogen beacons on the same 12 V circuit?

It meets SAE J595 Class I, R65 and California Title 13, and its LED load is low, so it can share a 12 V circuit with legacy beacons without causing voltage drop or pattern conflict.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.