We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Amber LED beacon light, low-profile cylindrical housing, permanent-mount base, hardwired connection

Ecco

ECCO 7460CA Amber Beacon Light, 3-7/64" H

SKU CH-3WET-6G0DM

Amber LED beacon light with SAE J845 Class I rating, IP67 sealing and 12 to 36V DC hardwired power

  • TypeWarning Lights
  • Amber LED visibility for roadside safety
  • SAE J845 Class I certified warning performance
  • IP67 sealed against dust and water ingress
  • 12 to 36 V DC suits most fleet vehicles
  • Permanent mount with hardwired connection for secure fit

Amber warning beacon for permanent vehicle mounting

The ECCO 7460CA is an amber LED beacon designed for permanent installation on vehicles requiring SAE J845 Class I warning output. It operates on 12 to 36V DC systems and connects via hardwired leads. The IP67-rated housing measures 3-7/64 inches in height with a 6 13/32 inch diameter base.

Continuous flashing performance in sealed housing

The LED light source produces a flashing signal inside a fully sealed enclosure rated IP67 against dust and water ingress. Because the unit is hardwired to the vehicle electrical system, it draws power continuously during operation without relying on a battery pack. The SAE J845 Class I rating confirms the photometric output meets the standard for primary warning devices under sustained use.

Hardwired 12-36V DC interface

The beacon connects directly to a 12 to 36V DC supply through permanent wiring, limiting installation to vehicles able to provide that voltage range and a fixed mounting location. The SAE J845 Class I certification defines the minimum effective intensity and flash rate the unit must maintain. CE marking indicates conformity with applicable European directives for electromagnetic compatibility and safety.

Highlights

  • Amber LED visibility for roadside safety
  • SAE J845 Class I certified warning performance
  • IP67 sealed against dust and water ingress
  • 12 to 36 V DC suits most fleet vehicles
  • Permanent mount with hardwired connection for secure fit

Specifications

TypeWarning Lights
BrandECCO

Questions about this item

How much heat or noise does the 12-36V DC LED beacon produce during continuous operation?

The LED light source runs cool and silent with no moving parts, so extended use adds negligible heat and no audible noise.

What existing vehicle wiring is required to hard-wire this permanent-mount beacon?

A 12 to 36V DC supply with a fused circuit and a ground connection are all that is needed for the hard-wired installation.

Will the SAE J845 Class I amber output overpower older incandescent markers on the same circuit?

The LED beacon draws far less current than legacy lamps, so it will not overload shared wiring or dim adjacent lights.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.