We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green round LED beacon light with blunt cut wires

Ecco

ECCO 6465G Green Flashing Beacon Light

SKU CH-1FWT-J10WN

Green flashing LED beacon rated SAE J845 Class 3 for 12-80V DC permanent installation

  • ColorGreen
  • Green LED beacon flashes for high visibility
  • SAE J845 Class 3 rating meets safety standards
  • Operates on 12-80V DC for universal fit
  • Low 1.3 W draw preserves battery life
  • Permanent mount with blunt-cut wires for secure install

ECCO 6465G Green Beacon Light

The ECCO 6465G is a green flashing beacon light designed for RV and universal vehicle applications. It uses LED technology with a 1.3 W power draw and operates on a wide 12-80V DC range. The SAE J845 Class 3 rating confirms suitability for warning and utility use. Installation is permanent with blunt-cut wires for direct wiring.

Sustained Operation on 12-80V DC

The low 1.3 W LED load produces minimal heat during continuous flashing cycles. A broad 12-80V DC input tolerates voltage fluctuations common on RV and heavy-equipment electrical systems. No cooling vents or moving parts are present, so output remains steady over long duty periods. The sealed round lens resists vibration and environmental exposure.

Permanent Mount with Blunt-Cut Wires

A 5 1/8 in diameter base and 3 7/8 in height fit standard beacon mounting brackets. Blunt-cut wires require crimping or soldering to the vehicle harness, giving a secure, corrosion-resistant connection. The green lens and green LED output match for consistent colour visibility. Universal vehicle compatibility simplifies fleet standardisation.

Highlights

  • Green LED beacon flashes for high visibility
  • SAE J845 Class 3 rating meets safety standards
  • Operates on 12-80V DC for universal fit
  • Low 1.3 W draw preserves battery life
  • Permanent mount with blunt-cut wires for secure install

Specifications

BrandECCO
ColorGreen

Questions about this item

How much heat or power draw should I expect from the 1.3 W LED when the beacon runs continuously?

The LED draws only 1.3 watts, so heat output is minimal and the unit can run all day without overheating concerns.

What existing wiring or voltage source do I need to connect the blunt-cut wires?

You need a 12 to 80 V DC supply; the blunt-cut wires are ready for direct connection to your vehicle or RV electrical system.

Will the SAE J845 Class 3 rating work with the older lighting circuits on my classic RV?

Yes, the wide 12 to 80 V DC range and simple two-wire hookup make it compatible with legacy 12 V systems without extra adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.