We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue round LED beacon light with blunt-cut wires

Ecco

Ecco 6465B Blue Flashing Beacon RV Lighting

SKU CH-F6WE-TKX59

Blue flashing LED beacon with SAE J845 Class 3 rating for permanent 12-80V DC mounting

  • ColorBlue
  • SAE J845 Class 3 rating meets regulatory visibility requirements
  • Blue LED flashing beacon increases on-road conspicuity
  • 12-80V DC range suits diverse vehicle electrical systems
  • 3 W draw minimises battery load during operation
  • Permanent mount with blunt-cut wires enables direct installation

Blue Flashing RV Beacon Light

This Ecco 6465B beacon uses LED technology to produce a blue flashing signal. It operates on a 12-80V DC supply and draws 1.3 W of power. The round housing measures 5 1/8 in diameter by 3 7/8 in height. It mounts permanently via blunt cut wires and meets SAE J845 Class 3 standards.

Who Should Choose This Beacon

RV owners needing a blue flashing warning light for permanent installation will find this unit suitable. The universal vehicle compatibility and wide voltage range simplify fitment. Buyers who require a different light colour or a non-flashing pattern should look elsewhere. Those needing an IP-rated enclosure for harsh environments must consider other options.

SAE J845 Class 3 Rating

The SAE J845 Class 3 rating defines the photometric performance for this warning beacon. This classification determines whether the light output meets specific regulatory requirements for the intended application. Verify that Class 3 satisfies local regulations before purchase.

Highlights

  • SAE J845 Class 3 rating meets regulatory visibility requirements
  • Blue LED flashing beacon increases on-road conspicuity
  • 12-80V DC range suits diverse vehicle electrical systems
  • 3 W draw minimises battery load during operation
  • Permanent mount with blunt-cut wires enables direct installation

Specifications

BrandECCO
ColorBlue

Questions about this item

What diameter mounting hole does the 5 1/8 in round beacon need?

The beacon has an overall diameter of 5 1/8 in and installs permanently; drill a hole that matches the supplied mounting template so the base seats flat and the blunt-cut wires pass through cleanly.

Which wire is positive on the blunt-cut leads when wiring to 12-80V DC?

Connect the red lead to switched positive and the black lead to ground; the unit draws 1.3 W and meets SAE J845 Class 3, so reversing polarity will prevent operation.

How often should the LED module be replaced on this SAE J845 Class 3 beacon?

The sealed LED module is rated for the vehicle’s service life; no scheduled replacement is required unless physical damage or water ingress causes the flash pattern to fail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.